Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 81)

AT8404 Switching Commands

Page 2 - 45 AT8404 CLI Reference Manual

authenticator PAE sets the controlled port mode to reflect the outcome of the authentication exchanges between the

supplicant, authenticator and the authentication server.

2.11.11.1 no dot1x port-control all

This command sets the authentication mode on all ports to the default value.

2.11.12 dot1x re-authenticate

This command begins the re-authentication sequence on the specified port. This command is only valid if the control

mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be returned.

2.11.13 dot1x re-authentication

This command enables re-authentication of the supplicant for the specified port.

2.11.13.1 no dot1x re-authentication

This command disables re-authentication of the supplicant for the specified port.

2.11.14 dot1x system-auth-control

Use this command to enable the dot1x authentication support on the switch. While disabled, the dot1x configuration

is retained and can be changed, but is not activated.

Default auto

Format dot1x port-control all {force-unauthorized | force-authorized | auto}

Mode Global Config

Format no dot1x port-control all

Mode Global Config

Format dot1x re-authenticate <slot/port>

Mode Privileged EXEC

Default disabled

Format dot1x re-authentication

Mode Interface Config

Format no dot1x re-authentication

Mode Interface Config

Default disabled

Format dot1x system-auth-control

Mode Global Config

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 372 373

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 81