Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 297)

AT8404 Management Commands

Page 5 - 21 AT8404 CLI Reference Manual

5.8.1 snmp-server

This command sets the name and the physical location of the switch, and the organization responsible for the

network. The range for <name>, <loc> and <con> is from 1 to 31 alphanumeric characters.

5.8.2 snmp-server community

This command adds (and names) a new SNMP community. A community <name> is a name associated with the

switch and with a set of SNMP managers that manage it with a specified privileged level. The length of <name> can

be up to 16 case-sensitive characters.

5.8.2.1 no snmp-server community

This command removes this community name from the table. The <name> is the community name to be deleted.

5.8.3 snmp-server community ipaddr

This command sets a client IP address for an SNMP community. The address is the associated community SNMP

packet sending address and is used along with the client IP mask value to denote a range of IP addresses from

which SNMP clients may use that community to access the device. A value of 0.0.0.0 allows access from any IP

address. Otherwise, this value is ANDed with the mask to determine the range of allowed client IP addresses. The

name is the applicable community name.

5.8.3.1 no snmp-server community ipaddr

This command sets a client IP address for an SNMP community to 0.0.0.0. The name is the applicable community

name.

Default none

Format snmp-server {sysname <name> | location <loc> | contact <con>}

Mode Global Config

Note: Community names in the SNMP Community Table must be unique. When making multiple entries

using the same community name, the first entry is kept and processed and all duplicate entries are

ignored.

Default • Public and private, which you can rename.

• Default values for the remaining four community names are blank.

Format snmp-server community <name>

Mode Global Config

Format no snmp-server community <name>

Mode Global Config

Default 0.0.0.0

Format snmp-server community ipaddr <ipaddr> <name>

Mode Global Config

Format no snmp-server community ipaddr <name>

Mode Global Config

1 2 ... 292 293 294 295 296 297 298 299 300 301 302 ... 372 373

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 297