Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 172)

Switching Commands AT8404

AT8404 CLI Reference Manual Page 2 - 136

2.27.13 debug isdp packet

This command enables tracing of ISDP packets processed by the switch. ISDP must be enabled on both the device

and the interface in order to monitor packets for a particular interface.

2.27.13.1 no debug isdp packet

This command disables tracing of ISDP packets on the receive or the transmit sides or on both sides.

2.28 Multicast Handling Commands

2.28.1 multicast (interface)

This command configures the port based multicast handling. The command defines the handling for port specific

unregistered multicast addresses. The default handling in FASTPATH is that such packets are flooded (argument

‘default’). The user can change the behaviour that such packets are dropped (argument ‘none’). The flooding mode

is set per port. It can be applied to either individual physical ports or to a port-channel.

2.28.2 show port multicast

This command displays the port based multicast handling. The commands displays for a specified interface or all

interfaces the multicast flooding settings. The displayed fields are

• the interface

• the multicast flooding, indicating whether a packet with unregistered multicast address should be flooded or not

ISDPv1 Packets Received Total number of ISDPv1 packets received

ISDPv1 Packets Transmitted Total number of ISDPv1 packets transmtted

ISDPv2 Packets Received Total number of ISDPv2 packets received

ISDPv2 Packets Transmitted Total number of ISDPv2 packets transmitted

ISDP Bad Header Number of packets received with a bad header

ISDP Checksum Error Number of packets received with a checksum error

ISDP Transmission Failure Number of packets which failed to transmit

ISDP Invalid Format Number of invalid packets received

ISDP Table Full Number of times a neighbor entry was not added to the table due to a full

database

ISDP IP Address Table Full Displays the number of times a neighbor entry was added to the table without

an IP address.

Format debug isdp packet [{receive | transmit}]

Mode Privileged EXEC

Format no debug isdp packet [{receive | transmit}]

Mode Privileged EXEC

Format multicast flood

Mode Interface Config

Term Definition

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 372 373

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 172