Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 45)

AT8404 Switching Commands

Page 2 - 9 AT8404 CLI Reference Manual

2.2.5 spanning-tree bpduguard

Use this command to enable BPDU Guard on the switch.

2.2.5.1 no spanning-tree bpduguard

Use this command to disable BPDU Guard on the switch.

2.2.6 spanning-tree bpdumigrationcheck

Use this command to force a transmission of rapid spanning tree (RSTP) and multiple spanning tree (MSTP)

BPDUs. Use the <slot/port> parameter to transmit a BPDU from a specified interface, or use the all keyword

to transmit BPDUs from all interfaces. This command forces the BPDU transmission when you execute it, so the

command does not change the system configuration or have a “no” version.

2.2.7 spanning-tree configuration name

This command sets the Configuration Identifier Name for use in identifying the configuration that this switch is

currently using. The <name> is a string of up to 32 characters.

2.2.7.1 no spanning-tree configuration name

This command resets the Configuration Identifier Name to its default.

2.2.8 spanning-tree configuration revision

This command sets the Configuration Identifier Revision Level for use in identifying the configuration that this switch

is currently using. The Configuration Identifier Revision Level is a number in the range of 0 to 65535.

Default disabled

Format spanning-tree bpduguard

Mode Global Config

Default disabled

Format no spanning-tree bpduguard

Mode Global Config

Format spanning-tree bpdumigrationcheck {<slot/port> | all}

Mode Global Config

Default base MAC address in hexadecimal notation

Format spanning-tree configuration name

<name>

Mode Global Config

Format no spanning-tree configuration name

Mode Global Config

Default 0

Format spanning-tree configuration revision

<0-65535>

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 372 373

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 45