Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 139)

AT8404 Switching Commands

Page 2 - 103 AT8404 CLI Reference Manual

2.20.1 set mld

This command enables MLD Snooping on the system (Global Config Mode) or an Interface (Interface Config Mode).

This command also enables MLD Snooping on a particular VLAN and enables MLD Snooping on all interfaces

participating in a VLAN.

If an interface has MLD Snooping enabled and you enable this interface for routing or enlist it as a member of a port-

channel (LAG), MLD Snooping functionality is disabled on that interface. MLD Snooping functionality is re-enabled

if you disable routing or remove port channel (LAG) membership from an interface that has MLD Snooping enabled.

MLD Snooping supports the following activities:

• Validation of address version, payload length consistencies and discarding of the frame upon error.

• Maintenance of the forwarding table entries based on the MAC address versus the IPv6 address.

• Flooding of unregistered multicast data packets to all ports in the VLAN.

2.20.1.1 no set mld

Use this command to disable MLD Snooping on the system.

2.20.2 set mld interfacemode

Use this command to enable MLD Snooping on all interfaces. If an interface has MLD Snooping enabled and you

enable this interface for routing or enlist it as a member of a port-channel (LAG), MLD Snooping functionality is

disabled on that interface. MLD Snooping functionality is re-enabled if you disable routing or remove port-channel

(LAG) membership from an interface that has MLD Snooping enabled.

2.20.2.1 no set mld interfacemode

Use this command to disable MLD Snooping on all interfaces.

Default disabled

Format set mld <vlanid>

Mode • Global Config

• Interface Config

• VLAN Mode

Format set mld <vlanid>

Mode • Global Config

• Interface Config

• VLAN Mode

Default disabled

Format set mld interfacemode

Mode Global Config

Format no set mld interfacemode

Mode Global Config

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 372 373

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 139