Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 76)

Switching Commands AT8404

AT8404 CLI Reference Manual Page 2 - 40

2.10.1 set gmrp adminmode

This command enables GARP Multicast Registration Protocol (GMRP) on the system.

2.10.1.1 no set gmrp adminmode

This command disables GARP Multicast Registration Protocol (GMRP) on the system.

2.10.2 set gmrp interfacemode

This command enables GARP Multicast Registration Protocol on a single interface (Interface Config mode) or all

interfaces (Global Config mode). If an interface which has GARP enabled is enabled for routing or is enlisted as a

member of a port-channel (LAG), GARP functionality is disabled on that interface. GARP functionality is

subsequently re-enabled if routing is disabled and port-channel (LAG) membership is removed from an interface

that has GARP enabled.

2.10.2.1 no set gmrp interfacemode

This command disables GARP Multicast Registration Protocol on a single interface or all interfaces. If an interface

which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), GARP

functionality is disabled. GARP functionality is subsequently re-enabled if routing is disabled and port-channel (LAG)

membership is removed from an interface that has GARP enabled.

2.10.3 show gmrp configuration

This command displays Generic Attributes Registration Protocol (GARP) information for one or all interfaces.

Default disabled

Format set gmrp adminmode

Mode Privileged EXEC

Format no set gmrp adminmode

Mode Privileged EXEC

Default disabled

Format set gmrp interfacemode

Mode • Interface Config

• Global Config

Format no set gmrp interfacemode

Mode • Interface Config

• Global Config

Format show gmrp configuration {<slot/port> | all}

Mode • Privileged EXEC

• User EXEC

Term Definition

Interface The slot/port of the interface that this row in the table describes.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 372 373

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 76