Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 72)

Switching Commands AT8404

AT8404 CLI Reference Manual Page 2 - 36

2.7.3 show switchport protected

This command displays the status of all the interfaces, including protected and unprotected interfaces.

2.7.4 show interfaces switchport

This command displays the status of the interface (protected/unprotected) under the groupid.

2.8 GARP Commands

This section describes the commands you use to configure Generic Attribute Registration Protocol (GARP) and view

GARP status. The commands in this section affect both GARP VLAN Registration Protocol (GVRP) and Garp

Multicast Registration Protocol (GMRP). GARP is a protocol that allows client stations to register with the switch for

membership in VLANS (by using GVMP) or multicast groups (by using GVMP).

2.8.1 set garp timer join

This command sets the GVRP join time for one port (Interface Config mode) or all (Global Config mode) and per

GARP. Join time is the interval between the transmission of GARP Protocol Data Units (PDUs) registering (or re-

registering) membership for a VLAN or multicast group. This command has an effect only when GVRP is enabled.

The time is from 10 to 100 (centiseconds). The value 20 centiseconds is 0.2 seconds.

Format show switchport protected <groupid>

Mode • Privileged EXEC

• User EXEC

Term Definition

Group ID The number that identifies the protected port group.

Name An optional name of the protected port group. The name can be up to 32 alphanumeric

characters long, including blanks. The default is blank.

List of Physical

Ports

List of ports, which are configured as protected for the group identified with <groupid>. If no

port is configured as protected for this group, this field is blank.

Format show interfaces switchport <slot/port> <groupid>

Mode • Privileged EXEC

• User EXEC

Term Definition

Name A string associated with this group as a convenience. It can be up to 32 alphanumeric

characters long, including blanks. The default is blank. This field is optional.

Protected Indicates whether the interface is protected or not. It shows TRUE or FALSE. If the group is a

multiple groups then it shows TRUE in Group <groupid>.

Default 20

Format set garp timer join <10-100>

Mode • Interface Config

• Global Config

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 372 373

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 72