Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 184)

Quality of Service (QoS) Commands AT8404

AT8404 CLI Reference Manual Page 3 - 10

3.3.1 class-map

This command defines a DiffServ class of type match-all. When used without any match condition, this command

enters the class-map mode. The <class-map-name> is a case sensitive alphanumeric string from 1 to 31

characters uniquely identifying an existing DiffServ class.

The class type of match-all indicates all of the individual match conditions must be true for a packet to be

considered a member of the class.This command may be used without specifying a class type to enter the Class-

Map Config mode for an existing DiffServ class.

3.3.1.1 no class-map

This command eliminates an existing DiffServ class. The <class-map-name> is the name of an existing DiffServ

class (The class name ‘default’ is reserved and is not allowed here). This command may be issued at any time; if

the class is currently referenced by one or more policies or by any other class, the delete action fails.

3.3.2 class-map rename

This command changes the name of a DiffServ class. The <class-map-name> is the name of an existing DiffServ

class. The <new-class-map-name> parameter is a case-sensitive alphanumeric string from 1 to 31 characters

uniquely identifying the class.

3.3.3 match ethertype

This command adds to the specified class definition a match condition based on the value of the ethertype. The

<ethertype> value is specified as one of the following keywords: appletalk, arp, ibmsna, ipv4, ipv6, ipx,

Note: The class-map-name 'default' is reserved and must not be used.

Note: The optional keywords [{ipv4 | ipv6}] specify the Layer 3 protocol for this class. If not

specified, this parameter defaults to ‘ipv4’. This maintains backward compatibility for configurations

defined on systems before IPv6 match items were supported.

Note: The CLI mode is changed to Class-Map Config or Ipv6-Class-Map Config when this command is

successfully executed depending on the [{ipv4 | ipv6}] keyword specified.

Format class-map match-all <class-map-name> [{ipv4 | ipv6}]

Mode Global Config

Format no class-map <class-map-name>

Mode Global Config

Default none

Format class-map rename <class-map-name> <new-class-map-name>

Mode Global Config

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 372 373

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 184