Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 228)

Utility Commands AT8404

AT8404 CLI Reference Manual Page 4 - 14

If you enter the interface <slot/port> parameter, in addition to the MAC Address and Status fields, the

following field appears:

The following information displays if you enter the count parameter:

4.4.8 show process cpu

This command provides the percentage utilization of the CPU by different tasks.

The following shows example CLI display output for the command.

(Broadcom FASTPATH Routing) #show process cpu

Mem: 52416K used, 74048K free, 0K shrd, 0K buff, 24976K cached

Load average: 0.16, 0.18, 0.12 (State: S=sleeping R=running, W=waiting)

Status The status of this entry. The meanings of the values are:

• Static—The value of the corresponding instance was added by the system or a user when

a static MAC filter was defined. It cannot be relearned.

• Learned—The value of the corresponding instance was learned by observing the source

MAC addresses of incoming traffic, and is currently in use.

• Management—The value of the corresponding instance (system MAC address) is also the

value of an existing instance of dot1dStaticAddress. It is identified with interface 0/1. and

is currently used when enabling VLANs for routing.

• Self—The value of the corresponding instance is the address of one of the switch’s

physical interfaces (the system’s own MAC address).

• GMRP Learned—The value of the corresponding was learned via GMRP and applies to

Multicast.

• Other—The value of the corresponding instance does not fall into one of the other

categories.

Term Definition

VLAN ID The VLAN on which the MAC address was learned.

Term Definition

Dynamic Address

count

Number of MAC addresses in the forwarding database that were automatically learned.

Static Address

(User-defined)

count

Number of MAC addresses in the forwarding database that were manually entered by a user.

Total MAC

Addresses in use

Number of MAC addresses currently in the forwarding database.

Total MAC

Addresses

available

Number of MAC addresses the forwarding database can handle.

Note: It is not necessarily the traffic to the CPU, but different tasks that keep the CPU busy.

Format show process cpu

Mode Privileged EXEC

Term Definition

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 372 373

Comentários a estes Manuais

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 228

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Kontron AT8404 CLI