Kontron AT8404 CLI Manual do Utilizador Página 108

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 373
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 107
Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 72
2.13.31 port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a logical slot/port for a
configured port-channel. The option all sets every configured port-channel with the same administrative mode
setting.
2.13.31.1 no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The interface is a logical slot and port for
a configured port-channel. The option all sets every configured port-channel with the same administrative mode
setting.
2.13.32 port-channel load-balance
This command selects the load-balancing option used on a port-channel (LAG). Traffic is balanced on a port-
channel (LAG) by selecting one of the links in the channel over which to transmit specific packets. The link is
selected by creating a binary pattern from selected fields in a packet, and associating that pattern with a particular
link.
Load-balancing is not supported on every device. The range of options for load-balancing may vary per device.
Default enabled
Format port-channel linktrap {<logical slot/port> | all}
Mode Global Config
Format no port-channel linktrap {<logical slot/port> | all}
Mode Global Config
Default 3
Format port-channel load-balance { 1 | 2 | 3 | 4 | 5 | 6 } {<slot/port> |<all>}
Mode Interface Config
Global Config
Term Definition
1 Source MAC, VLAN, EtherType, and incoming port associated with the packet
2 Destination MAC, VLAN, EtherType, and incoming port associated with the packet
3 Source/Destination MAC, VLAN, EtherType, and incoming port associated with the packet
4 Source IP and Source TCP/UDP fields of the packet
5 Destination IP and Destination TCP/UDP Port fields of the packet
6 Source/Destination IP and source/destination TCP/UDP Port fields of the packet
<slot/port>| all Global Config Mode only: The interface is a logical slot/port number of a configured port-channel.
"All" applies the command to all currently configured port-channels.
Vista de página 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 372 373

Comentários a estes Manuais

Sem comentários