
Quality of Service (QoS) Commands AT8404
AT8404 CLI Reference Manual Page 3 - 34
3.8.7 show acl-traptimer
This command displays the time interval for generating ACL traps. A trap is generated if a ACL rule applies for an
incoming packet.
3.8.8 acl-traptimer
This command sets the time interval for generating ACL traps. An ACL trap is generated if ACL trap generation is
enabled and an ACL rule applies for an incoming packet. The generation is checked for a specified time interval.
The time interval value indicates seconds.
3.8.8.1 no acl-traptimer
This command sets the time interval for generating ACL traps. An ACL trap is generated if ACL trap generation is
enabled and an ACL rule applies for an incoming packet. The generation is checked for a specified time interval.
The time interval value indicates seconds.
3.8.9 show ip access-lists
This command displays an IP ACL <accesslistnumber> is the number used to identify the IP ACL.
Format show acl-traptimer
Mode Privileged EXEC
Default 300
Format acl-traptimer <30-600>
Mode Global Config
Format no acl-traptimer
Mode Global Config
Format show ip access-lists <accesslistnumber>
Mode Privileged EXEC
Note: Only the access list fields that you configure are displayed.
Term Definition
Rule Number The number identifier for each rule that is defined for the IP ACL.
Action The action associated with each rule. The possible values are Permit or Deny.
Match All Indicates whether this access list applies to every packet. Possible values are True or False.
Protocol The protocol to filter for this rule.
Source IP Address The source IP address for this rule.
Source IP Mask The source IP Mask for this rule.
Source L4 Port
Keyword
The source port for this rule.
Destination IP
Address
The destination IP address for this rule.
Comentários a estes Manuais