Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 185)

AT8404 Quality of Service (QoS) Commands

Page 3 - 11 AT8404 CLI Reference Manual

mplsmcast, mplsucast, netbios, novell, pppoe, rarp or as a custom ethertype value in the range of 0x0600-

0xFFFF.

3.3.4 match any

This command adds to the specified class definition a match condition whereby all packets are considered to belong

to the class.

3.3.5 match class-map

This command adds to the specified class definition the set of match conditions defined for another class. The

<refclassname> is the name of an existing DiffServ class whose match conditions are being referenced by the

specified class definition.

Note: This command is not available on the Broadcom 5630x platform.

Format match ethertype {<keyword> | custom <0x0600-0xFFFF>}

Mode Class-Map Config

Ipv6-Class-Map Config

Default none

Format match any

Mode Class-Map Config

Ipv6-Class-Map Config

Default none

Format match class-map <refclassname>

Mode Class-Map Config

Ipv6-Class-Map Config

Note:

• The parameters <refclassname> and <class-map-name> can not be the same.

• Only one other class may be referenced by a class.

• Any attempts to delete the <refclassname> class while the class is still referenced by any <class-

map-name> fails.

• The combined match criteria of <class-map-name> and <refclassname> must be an allowed

combination based on the class type.

• Any subsequent changes to the <refclassname> class match criteria must maintain this validity, or

the change attempt fails.

• The total number of class rules formed by the complete reference class chain (including both

predecessor and successor classes) must not exceed a platform-specific maximum. In some cases,

each removal of a refclass rule reduces the maximum number of available rules in the class definition

by one.

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 372 373

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 185