Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 65)

AT8404 Switching Commands

Page 2 - 29 AT8404 CLI Reference Manual

2.3.25 show vlan brief

This command displays a list of all configured VLANs.

2.3.26 show vlan port

This command displays VLAN port information.

Configured The configured degree of participation of this port in this VLAN. The permissible values are:

• Include - This port is always a member of this VLAN. This is equivalent to registration fixed

in the IEEE 802.1Q standard.

• Exclude - This port is never a member of this VLAN. This is equivalent to registration

forbidden in the IEEE 802.1Q standard.

• Autodetect - To allow the port to be dynamically registered in this VLAN via GVRP. The

port will not participate in this VLAN unless a join request is received on this port. This is

equivalent to registration normal in the IEEE 802.1Q standard.

Tagging The tagging behavior for this port in this VLAN.

• Tagged - Transmit traffic for this VLAN as tagged frames.

•Untagged - Transmit traffic for this VLAN as untagged frames.

Format show vlan brief

Mode • Privileged EXEC

• User EXEC

Term Definition

VLAN ID There is a VLAN Identifier (vlanid) associated with each VLAN. The range of the VLAN ID is

1 to 4094.

VLAN Name A string associated with this VLAN as a convenience. It can be up to 32 alphanumeric

characters long, including blanks. The default is blank. VLAN ID 1 always has a name of

“Default.” This field is optional.

VLAN Type Type of VLAN, which can be Default (VLAN ID = 1) or static (one that is configured and

permanently defined), or a Dynamic (one that is created by GVRP registration).

Format show vlan port {<slot/port> | all}

Mode • Privileged EXEC

• User EXEC

Term Definition

Interface Valid slot and port number separated by a forward slash. It is possible to set the parameters

for all ports by using the selectors on the top line.

Port VLAN ID The VLAN ID that this port will assign to untagged frames or priority tagged frames received

on this port. The value must be for an existing VLAN. The factory default is 1.

Acceptable Frame

Types

The types of frames that may be received on this port. The options are 'VLAN only' and 'Admit

All'. When set to 'VLAN only', untagged frames or priority tagged frames received on this port

are discarded. When set to 'Admit All', untagged frames or priority tagged frames received on

this port are accepted and assigned the value of the Port VLAN ID for this port. With either

option, VLAN tagged frames are forwarded in accordance to the 802.1Q VLAN specification.

Term Definition

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 372 373

Comentários a estes Manuais

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 65

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Kontron AT8404 CLI