Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 196)

Quality of Service (QoS) Commands AT8404

AT8404 CLI Reference Manual Page 3 - 22

3.6 DiffServ Show Commands

Use the DiffServ show commands to display configuration and status information for classes, policies, and services.

You can display DiffServ information in summary or detailed formats. The status information is only shown when the

DiffServ administrative mode is enabled.

3.6.1 show class-map

This command displays all configuration information for the specified class. The <class-name> is the name of

an existing DiffServ class.

If the class-name is specified the following fields are displayed:

If you do not specify the Class Name, this command displays a list of all defined DiffServ classes. The following fields

are displayed:

Format no service-policy in <policymapname>

Modes • Global Config

• Interface Config

Format show class-map <class-name>

Modes • Privileged EXEC

• User EXEC

Term Definition

Class Name The name of this class.

Class Type A class type of ‘all’ means every match criterion defined for the class is evaluated

simultaneously and must all be true to indicate a class match.

L3 Proto The Layer 3 protocol for this class. Possible values are IPv4 and IPv6.

Match Criteria The Match Criteria fields are only displayed if they have been configured. Not all platforms

support all match criteria values. They are displayed in the order entered by the user. The

fields are evaluated in accordance with the class type. The possible Match Criteria fields are:

Destination IP Address, Destination Layer 4 Port, Destination MAC Address, Ethertype,

Source MAC Address, VLAN, Class of Service, Every, IP DSCP, IP Precedence, IP TOS,

Protocol Keyword, Reference Class, Source IP Address, and Source Layer 4 Port.

Values The values of the Match Criteria.

Term Definition

Class Name The name of this class. (Note that the order in which classes are displayed is not necessarily

the same order in which they were created.)

Class Type A class type of ‘all’ means every match criterion defined for the class is evaluated

simultaneously and must all be true to indicate a class match.

Ref Class Name The name of an existing DiffServ class whose match conditions are being referenced by the

specified class definition.

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 372 373

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 196