Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 252)

Utility Commands AT8404

AT8404 CLI Reference Manual Page 4 - 38

4.8.7.1 no host

This command removes the IP address of the DHCP client.

4.8.8 lease

This command configures the duration of the lease for an IP address that is assigned from a DHCP server to a DHCP

client. The overall lease time should be between 1-86400 minutes. If you specify infinite, the lease is set for 60

days. You can also specify a lease duration. Days is an integer from 0 to 59. Hours is an integer from 0 to 23.

Minutes is an integer from 0 to 59.

4.8.8.1 no lease

This command restores the default value of the lease time for DHCP Server.

4.8.9 network (DHCP Pool Config)

Use this command to configure the subnet number and mask for a DHCP address pool on the server. Network-

number is a valid IP address, made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.

Mask is the IP subnet mask for the specified address pool. The prefix-length is an integer from 0 to 32.

4.8.9.1 no network

This command removes the subnet number and mask.

4.8.10 bootfile

The command specifies the name of the default boot image for a DHCP client. The <filename> specifies the boot

image file.

Format no host

Mode DHCP Pool Config

Default 1 (day)

Format lease [{<days> [<hours>] [<minutes>] | infinite}]

Mode DHCP Pool Config

Format no lease

Mode DHCP Pool Config

Default none

Format network <networknumber> [{<mask> | <prefixlength>}]

Mode DHCP Pool Config

Format no network

Mode DHCP Pool Config

Format bootfile <filename>

Mode DHCP Pool Config

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 372 373

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 252