Kontron AT8404 CLI Manual do Utilizador descarregar pdf (Página 141)

AT8404 Switching Commands

Page 2 - 105 AT8404 CLI Reference Manual

2.20.5 set mld maxresponse

Use this command to set the MLD Maximum Response time for the system, on a particular interface or VLAN. The

Maximum Response time is the amount of time in seconds that a switch will wait after sending a query on an

interface because it did not receive a report for a particular group in that interface. This value must be less than the

MLD Query Interval time value. The range is 1 to 65 seconds.

2.20.5.1 no set mld maxresponse

Use this command to set the max response time (on the interface or VLAN) to the default value.

2.20.6 set mld mcrtexpiretime

Use this command to set the Multicast Router Present Expiration time. The time is set for the system, on a particular

interface or VLAN. This is the amount of time in seconds that a switch waits for a query to be received on an interface

before the interface is removed from the list of interfaces with multicast routers attached. The range is 0 to 3600

seconds. A value of 0 indicates an infinite timeout, i.e. no expiration.

2.20.6.1 no set mld mcrtexpiretime

Use this command to set the Multicast Router Present Expiration time to 0. The time is set for the system, on a

particular interface or a VLAN.

2.20.7 set mld mrouter

Use this command to configure the VLAN ID for the VLAN that has the multicast router attached mode enabled.

Default 10 seconds

Format set mld maxresponse <1-65>

Mode • Global Config

• Interface Config

• VLAN Mode

Format no set mld maxresponse

Mode • Global Config

• Interface Config

• VLAN Mode

Default 0

Format set mld mcrtexpiretime <vlanid> <0-3600>

Mode • Global Config

• Interface Config

Format no set mld mcrtexpiretime <vlanid>

Mode • Global Config

• Interface Config

Format set mld mrouter <vlanid>

Mode Interface Config

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 372 373

Sem comentários

Kontron AT8404 CLI Manual do Utilizador Página 141