Kontron AT8902M CLI Manual do Utilizador descarregar pdf (Página 270)

Management Commands AT8902M

AT8902M CLI Reference Manual Page 6 - 18

6.6.5.1 no snmp-server community mode

This command deactivates an SNMP community. If the community is disabled, no

SNMP requests using this community are accepted. In this case the SNMP manager

associated with this community cannot manage the switch until the Status is changed

back to Enable.

Format no snmp-server community mode <name>

Mode Global Config

6.6.6 snmp-server community ro

This command restricts access to switch information. The access mode is read-only

(also called public).

Format snmp-server community ro <name>

Mode Global Config

6.6.7 snmp-server community rw

This command restricts access to switch information. The access mode is read/write

(also called private).

Format snmp-server community rw <name>

Mode Global Config

6.6.8 snmp-server enable traps violation

This command enables the sending of new violation traps designating when a packet

with a disallowed MAC address is received on a locked port.

NOTE: For other port security commands, see 2.6 “Protected Ports Com-

mands” on page 2 - 30.

Default disabled

Format snmp-server enable traps violation

Mode Interface Config

6.6.8.1 no snmp-server enable traps violation

This command disables the sending of new violation traps.

Format no snmp-server enable traps violation

Mode Interface Config

6.6.9 snmp-server enable traps

This command enables the Authentication Flag.

Default enabled

Format snmp-server enable traps

Mode Global Config

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 314 315

Sem comentários

Kontron AT8902M CLI Manual do Utilizador Página 270