Kontron AT8902M CLI Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Kontron AT8902M CLI. Kontron AT8902M CLI User Manual [en] Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 315
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes

Resumo do Conteúdo

Página 1 - AdvancedTCA

AT8902M CLI Reference ManualAdvancedTCA M5305_TECH_2 Manual ID1.05 Revision Index26 March, 2008 Date of Issue

Página 2 - AT8902M Preface

Table of Contents AT8902MAT8902M CLI Reference Manual x3.6.2 bootpdhcprelay enable ...3

Página 3 - Table of Contents

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 64Max Response Time Displays the amount of time the switch waits after it sends a que

Página 4

AT8902M Switching CommandsPage 2 - 65 AT8902M CLI Reference ManualDescription The text description of this multicast table entry. Interfaces The l

Página 5

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 662.16.3 port-security max-staticThis command sets the maximum number of statically lo

Página 6

AT8902M Switching CommandsPage 2 - 67 AT8902M CLI Reference ManualAdmin Mode Port Locking mode for the Interface.Dynamic Limit Maximum dynamically

Página 7

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 68Format no lldp transmitMode Interface Config2.17.2 lldp receiveUse this command

Página 8

AT8902M Switching CommandsPage 2 - 69 AT8902M CLI Reference ManualFormat lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]Mode Interfa

Página 9

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 70Format lldp notification-interval <interval>Mode Global Config2.17.7.1 no

Página 10 - Table of Contents AT8902M

AT8902M Switching CommandsPage 2 - 71 AT8902M CLI Reference ManualNotify Shows whether the interface sends remote data change notifications.TLVs

Página 11 - AT8902M Table of Contents

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 72Chassis ID Shows the ID of the remote device.Port ID Shows the port number that

Página 12

AT8902M Switching CommandsPage 2 - 73 AT8902M CLI Reference Manual2.17.16 show lldp local-device detailUse this command to display detailed informatio

Página 13

AT8902M Table of Contentsxi AT8902M CLI Reference Manual3.7.41 show ip ospf ...

Página 14

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 74Format dos-control sipdipMode Global Config2.18.1.1 no dos-control sipdipThis co

Página 15

AT8902M Switching CommandsPage 2 - 75 AT8902M CLI Reference Manual2.18.4 dos-control tcpflagThis command enables TCP Flag Denial of Service protection

Página 16

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 76Mode Global Config2.18.6.1 no dos-control icmpThis command disables Maximum ICMP P

Página 17

AT8902M Switching CommandsPage 2 - 77 AT8902M CLI Reference ManualDefault all Format show forwardingdb agetime [fdbid | all]Mode Privileged EXEC

Página 18

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 78Most MFDB Entries Ever Used Displays the largest number of entries that have been p

Página 19 - Appendix

Routing CommandsChapter 13Page 3 - 1 AT8902M CLI Reference ManualAT8902M

Página 20

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 23. Routing CommandsThis chapter describes the routing commands available in the CLI.The

Página 21

AT8902M Routing CommandsPage 3 - 3 AT8902M CLI Reference Manual3.1.2 ip proxy-arpThis command enables proxy ARP on a router interface. Without proxy A

Página 22 - Preface AT8902M

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 43.1.5 arp purgeThis command causes the specified IP address to be removed from the ARP

Página 23

AT8902M Routing CommandsPage 3 - 5 AT8902M CLI Reference Manual3.1.8.1 no arp timeoutThis command configures the default ARP entry ageout time. Format

Página 24

Table of Contents AT8902MAT8902M CLI Reference Manual xii4.1.8 show classofservice ip-precedence-mapping ...4 - 54.1.9 s

Página 25

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 63.1.11 show arp briefThis command displays the brief Address Resolution Protocol (ARP)

Página 26

AT8902M Routing CommandsPage 3 - 7 AT8902M CLI Reference Manual3.2.1.1 no routing This command disables routing for an interface. You can view the cur

Página 27

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 8routing protocols. The preference also controls whether a static route is more or less

Página 28 - 1.2 Command Conventions

AT8902M Routing CommandsPage 3 - 9 AT8902M CLI Reference ManualDefault 1Format ip route distance <1-255>Mode Global Config3.2.6.1 no ip rou

Página 29 - 1.2.1 Common Parameter Values

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 10Packets originated on the router, such as OSPF packets, may be fragmented by the IP st

Página 30

AT8902M Routing CommandsPage 3 - 11 AT8902M CLI Reference Manual3.2.12 show ip interface This command displays all pertinent information about the IP

Página 31 - 1.5 Command Modes

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 12IP Mask The IP mask of the routing interface in 32-bit dotted decimal format. Netdir

Página 32

AT8902M Routing CommandsPage 3 - 13 AT8902M CLI Reference ManualFormat show ip route summary [all] Mode Privileged EXEC User EXECConnected Routes

Página 33

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 143.3 Router Discovery Protocol CommandsThis section describes the commands you use to v

Página 34 - 1.5.2 CLI Error Messages

AT8902M Routing CommandsPage 3 - 15 AT8902M CLI Reference Manual3.3.3.1 no ip irdp holdtime This command configures the default value, in seconds, of

Página 35 - 1.6 Using CLI Help

AT8902M Table of Contentsxiii AT8902M CLI Reference Manual4.6.4 show diffserv service ...

Página 36 - 1.7 Accessing the CLI

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 163.3.6.1 no ip irdp preference This command configures the default preferability of the

Página 37 - Switching Commands

AT8902M Routing CommandsPage 3 - 17 AT8902M CLI Reference ManualMode VLAN Config3.4.2 show ip vlan This command displays the VLAN routing informatio

Página 38 - 2. Switching Commands

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 183.5.2.1 no ip vrrp Use this command in Interface Config mode to delete the virtual rou

Página 39

AT8902M Routing CommandsPage 3 - 19 AT8902M CLI Reference Manualoptional, it is only required when authorization type is simple text password. The par

Página 40

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 203.5.7.1 no ip vrrp priorityThis command sets the default priority value for the virtua

Página 41

AT8902M Routing CommandsPage 3 - 21 AT8902M CLI Reference ManualZero Priority Packets Sent The total number of VRRP packets sent by the virtual route

Página 42

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 22Administrative Mode The status (Enable or Disable) of the specific router.State The

Página 43

AT8902M Routing CommandsPage 3 - 23 AT8902M CLI Reference Manual3.6.2.1 no bootpdhcprelay enableThis command disables the forwarding of relay requests

Página 44

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 243.6.5.1 no bootpdhcprelay serveripThis command configures the default server IP addres

Página 45

AT8902M Routing CommandsPage 3 - 25 AT8902M CLI Reference ManualMode Router OSPF Config3.7.3 ip ospfThis command enables OSPF on a router interface.

Página 46

Table of Contents AT8902MAT8902M CLI Reference Manual xiv5.3 System Information and Statistics Commands ...5 - 65

Página 47

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 26Format no area <areaid> nssaMode Router OSPF Config3.7.7 area nssa default-i

Página 48

AT8902M Routing CommandsPage 3 - 27 AT8902M CLI Reference Manual3.7.10 area nssa translator-role (OSPF)This command configures the translator role of

Página 49

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 283.7.13 area stub (OSPF)This command creates a stub area for the specified area ID. A s

Página 50

AT8902M Routing CommandsPage 3 - 29 AT8902M CLI Reference Manual3.7.16 area virtual-link authenticationThis command configures the authentication type

Página 51

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 30Format area <areaid> virtual-link <neighbor> hello-interval <1-65535

Página 52

AT8902M Routing CommandsPage 3 - 31 AT8902M CLI Reference Manual3.7.21 default-information originate (OSPF)This command is used to control the adverti

Página 53

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 32Mode Router OSPF Config3.7.24 distribute-list out (OSPF)Use this command to specify

Página 54

AT8902M Routing CommandsPage 3 - 33 AT8902M CLI Reference Manual3.7.26.1 no external-lsdb-limit This command configures the default external LSDB limi

Página 55

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 34Mode Interface Config3.7.30 ip ospf dead-intervalThis command sets the OSPF dead int

Página 56

AT8902M Routing CommandsPage 3 - 35 AT8902M CLI Reference Manual3.7.32.1 no ip ospf priority This command sets the default OSPF priority for the speci

Página 57

AT8902M Table of Contentsxv AT8902M CLI Reference Manual5.5.6 clear port-channel ...

Página 58

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 36Default enabledFormat ip ospf mtu-ignoreMode Interface Config3.7.35.1 no ip

Página 59

AT8902M Routing CommandsPage 3 - 37 AT8902M CLI Reference Manual3.7.38.1 no maximum-pathsThis command resets the number of paths that OSPF can report

Página 60

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 38learnt by other protocols) or disabled (if the router is not configured for the same).

Página 61

AT8902M Routing CommandsPage 3 - 39 AT8902M CLI Reference ManualFormat show ip ospf abrModes Privileged EXEC User EXECType The type of the route

Página 62

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 40Default Metric The metric value for the default route advertised into the NSSA. Defau

Página 63

AT8902M Routing CommandsPage 3 - 41 AT8902M CLI Reference Manual3.7.45 show ip ospf database database-summaryUse this command to display the number of

Página 64

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 42Transit Delay Interval A number representing the OSPF Transit Delay for the speci-fie

Página 65

AT8902M Routing CommandsPage 3 - 43 AT8902M CLI Reference ManualModes Privileged EXEC User EXECOSPF Area ID The area id of this OSPF interface.Area

Página 66

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 44Authentication Failure The number of OSPF packets dropped because the sender is not a

Página 67

AT8902M Routing CommandsPage 3 - 45 AT8902M CLI Reference Manual Attempt - no recent information has been received from the neighbor but a more conc

Página 68

Table of Contents AT8902MAT8902M CLI Reference Manual xvi5.8.19 ip dhcp bootp automatic ...

Página 69

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 463.7.50 show ip ospf rangeThis command displays information about the area ranges for t

Página 70

AT8902M Routing CommandsPage 3 - 47 AT8902M CLI Reference ManualMetric Val The metric value is applied based on the TOS. It defaults to the least me

Página 71

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 483.8 Routing Information Protocol (RIP) CommandsThis section describes the commands you

Página 72

AT8902M Routing CommandsPage 3 - 49 AT8902M CLI Reference ManualFormat no auto-summaryMode Router RIP Config3.8.5 default-information originate (R

Página 73

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 50Default 0Format distribute-list <1-199> out {ospf | static | connected}Mode

Página 74

AT8902M Routing CommandsPage 3 - 51 AT8902M CLI Reference Manual3.8.11 ip rip send version This command configures the interface to allow RIP control

Página 75

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 52Mode Router RIP Config3.8.14 redistribute (RIP)This command configures RIP protocol

Página 76

AT8902M Routing CommandsPage 3 - 53 AT8902M CLI Reference Manual3.8.16 show ip rip interface briefThis command displays general information for each R

Página 77

Routing Commands AT8902MAT8902M CLI Reference Manual Page 3 - 54Bad Packets Received The number of RIP response packets received by the RIP pro-cess

Página 78

Quality of Service CommandsChapter 14Page 4 - 1 AT8902M CLI Reference ManualAT8902M

Página 79

AT8902M Table of Contentsxvii AT8902M CLI Reference Manual6.1.3 serviceport protocol ...

Página 80

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 24. Quality of Service (QoS) CommandsThis chapter describes the Quality

Página 81

AT8902M Quality of Service (QoS) CommandsPage 4 - 3 AT8902M CLI Reference Manual Modes Global Config Interface Config4.1.2 classofservice ip-dscp-ma

Página 82

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 44.1.4 cos-queue min-bandwidthThis command specifies the minimum transm

Página 83

AT8902M Quality of Service (QoS) CommandsPage 4 - 5 AT8902M CLI Reference ManualModes Global Config Interface Config4.1.7 show classofservice dot1p-

Página 84

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 64.1.10 show classofservice trustThis command displays the current trus

Página 85

AT8902M Quality of Service (QoS) CommandsPage 4 - 7 AT8902M CLI Reference ManualYou configure DiffServ in several stages by specifying three DiffServ

Página 86

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 84.2.1.1 no diffserv This command sets the DiffServ operational mode to

Página 87

AT8902M Quality of Service (QoS) CommandsPage 4 - 9 AT8902M CLI Reference Manual4.3.2 class-map renameThis command changes the name of a DiffServ clas

Página 88

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 10• The total number of class rules formed by the complete reference cl

Página 89

AT8902M Quality of Service (QoS) CommandsPage 4 - 11 AT8902M CLI Reference Manual4.3.9 match dstipThis command adds to the specified class definition

Página 90

Table of Contents AT8902MAT8902M CLI Reference Manual xviii6.6.4 snmp-server community ipmask ...6 - 1

Página 91

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 12NOTE: The IP DSCP, IP Precedence, and IP ToS match conditions are alt

Página 92

AT8902M Quality of Service (QoS) CommandsPage 4 - 13 AT8902M CLI Reference Manual4.3.15 match source-address macThis command adds to the specified cla

Página 93

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 14Mode Class-Map Config4.3.19 match secondary-vlanThis command adds t

Página 94

AT8902M Quality of Service (QoS) CommandsPage 4 - 15 AT8902M CLI Reference Manual4.4.2 dropThis command specifies that all packets for the associated

Página 95

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 16NOTE: The CLI mode is changed to Policy-Class-Map Config when this co

Página 96

AT8902M Quality of Service (QoS) CommandsPage 4 - 17 AT8902M CLI Reference ManualIncompatibilities Drop, Mark CoS, Mark IP DSCP, Police4.4.10 police-

Página 97

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 184.4.12 policy-map renameThis command changes the name of a DiffServ p

Página 98

AT8902M Quality of Service (QoS) CommandsPage 4 - 19 AT8902M CLI Reference Manualinbound direction. There is no separate interface administrative &apo

Página 99

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 204.6.2 show diffservThis command displays the DiffServ General Status

Página 100 - Switching Commands AT8902M

AT8902M Quality of Service (QoS) CommandsPage 4 - 21 AT8902M CLI Reference ManualAssign Queue Directs traffic stream to the specified QoS queue. Th

Página 101 - AT8902M Switching Commands

AT8902M Table of Contentsxix AT8902M CLI Reference Manual6.10.4 script list ...

Página 102

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 22If the Policy Name is not specified this command displays a list of a

Página 103

AT8902M Quality of Service (QoS) CommandsPage 4 - 23 AT8902M CLI Reference Manual4.6.6 show policy-map interfaceThis command displays policy-oriented

Página 104

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 244.7.1 mac access-list extended This command creates a MAC Access Cont

Página 105

AT8902M Quality of Service (QoS) CommandsPage 4 - 25 AT8902M CLI Reference ManualThe Ethertype may be specified as either a keyword or a four-digit he

Página 106

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 264.7.4 mac access-group This command attaches a specific MAC Access Co

Página 107

AT8902M Quality of Service (QoS) CommandsPage 4 - 27 AT8902M CLI Reference ManualMirror Interface On Broadcom 5650x platforms, the slot/port to which

Página 108

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 28 4.8.1.1 no access-listThis command deletes an IP ACL that is identif

Página 109

AT8902M Quality of Service (QoS) CommandsPage 4 - 29 AT8902M CLI Reference Manual4.8.2 ip access-groupThis command attaches a specified IP ACL to one

Página 110

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 30Action The action associated with each rule. The possible values ar

Página 111

AT8902M Quality of Service (QoS) CommandsPage 4 - 31 AT8902M CLI Reference Manual4.9 ACL trap commands4.9.1 acl-traptimerThis command sets the time in

Página 112

AT8902M PrefacePage ii AT8902M CLI Reference ManualRevision HistoryImprintKontron may be contacted via the following:Kontron Canada, Inc. Kontron Modu

Página 113

Table of Contents AT8902MAT8902M CLI Reference Manual xx

Página 114

Quality of Service (QoS) Commands AT8902MAT8902M CLI Reference Manual Page 4 - 32

Página 115 - Chapter 1

Utility CommandsChapter 15Page 5 - 1 AT8902M CLI Reference ManualAT8902M

Página 116 - 3. Routing Commands

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 25. Utility CommandsThis chapter describes the utility commands available in the CLI.The

Página 117 - AT8902M Routing Commands

AT8902M Utility CommandsPage 5 - 3 AT8902M CLI Reference Manual5.1.3 download frudataThis command updates the IPMI FRU data. It downloades a FRU image

Página 118 - Routing Commands AT8902M

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 45.1.8 startupslot activateThis command sets the startup slot to active and will use thi

Página 119

AT8902M Utility CommandsPage 5 - 5 AT8902M CLI Reference Manual5.2.3 set board fcapThis command enables or disables some firmware capabilities. If the

Página 120

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 65.2.8 show atca ekeyingThis command displays the current ekeying status together with a

Página 121

AT8902M Utility CommandsPage 5 - 7 AT8902M CLI Reference Manualhardware command will not be available. For a description of the command output, see 5.

Página 122

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 8Broadcast Packets Received The total number of packets received that were directed to

Página 123

AT8902M Utility CommandsPage 5 - 9 AT8902M CLI Reference Manualon the network (excluding framing bits but including Frame Check Sequence (FCS) octets)

Página 124

AT8902M PrefacePage xxi AT8902M CLI Reference ManualAbout This BookThis document describes configuration commands for FASTPATH® software. The commands

Página 125

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 10that were between 1024 and 1518 octets in length inclusive (excluding framing bits but

Página 126

AT8902M Utility CommandsPage 5 - 11 AT8902M CLI Reference ManualRx FCS Errors - The total number of packets received that had a length (excluding fram

Página 127

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 12Packets Transmitted 256-511 Octets - The total number of packets (including bad packet

Página 128

AT8902M Utility CommandsPage 5 - 13 AT8902M CLI Reference ManualExcessive Collisions - A count of frames for which trans-mission on a particular inter

Página 129

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 14Multicast Packets Received The total number of packets received that were directed to

Página 130

AT8902M Utility CommandsPage 5 - 15 AT8902M CLI Reference Manual5.3.7 show mac-addr-tableThis command displays the forwarding database entries. These

Página 131

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 16Static Address (User-defined) count Number of MAC addresses in the forward-ing databa

Página 132

AT8902M Utility CommandsPage 5 - 17 AT8902M CLI Reference Manual5.3.10 show tech-supportUse the show tech-support command to display system and config

Página 133

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 18Format show boardinfo update-statusMode Privileged EXEC5.3.15 show boardinfo versi

Página 134

AT8902M Utility CommandsPage 5 - 19 AT8902M CLI Reference Manual5.3.19 show boardinfo ledThis command displays the LED status.Format show boardinfo l

Página 135

Preface AT8902MAT8902M CLI Reference Manual Page xxiiTrademarks© 2005 LVL7 Systems, Inc. All rights reserved. FASTPATH® and MasterDriver® are register

Página 136

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 205.3.25 show boardinfo memory-usageThis command displays the memory usage. It shows mal

Página 137

AT8902M Utility CommandsPage 5 - 21 AT8902M CLI Reference ManualMode Global Config5.4.3.1 no logging cli-commandThis command disables the CLI comman

Página 138

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 22Default 514Format logging port <portid>Mode Global Config5.4.7.1 no loggin

Página 139

AT8902M Utility CommandsPage 5 - 23 AT8902M CLI Reference Manual5.4.10 show logging bufferedThis command displays buffered logging (system startup and

Página 140

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 24Format show logging backtraceMode Privileged EXEC5.5 System Utility and Clear Comm

Página 141

AT8902M Utility CommandsPage 5 - 25 AT8902M CLI Reference ManualMode Privileged EXEC5.5.6 clear port-channelThis command clears all port-channels (L

Página 142

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 26Mode Privileged EXEC5.5.12.1 no set bootstopkeyThis command resets the bootstop key

Página 143

AT8902M Utility CommandsPage 5 - 27 AT8902M CLI Reference Manual{xmodem | tftp://<ipaddr>/<filepath>/<filename>}For TFTP, the <ip

Página 144

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 285.6.1 license advancedThis command enables a particular feature. This command also ena

Página 145

AT8902M Utility CommandsPage 5 - 29 AT8902M CLI Reference ManualMode Global Config5.7.2 sntp client modeThis command enables Simple Network Time Pro

Página 146

AT8902M PrefacePage xxiii AT8902M CLI Reference ManualExplanation of SymbolsFor Your SafetyYour new Kontron product was developed and tested carefully

Página 147

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 30Default 5Format sntp unicast client poll-timeout <poll-timeout>Mode Global

Página 148

AT8902M Utility CommandsPage 5 - 31 AT8902M CLI Reference Manual5.7.8.1 no sntp serverThis command deletes an server from the configured SNTP servers.

Página 149

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 32Server Maximum Entries Total number of SNTP Servers allowed.Server Current Entries T

Página 150

AT8902M Utility CommandsPage 5 - 33 AT8902M CLI Reference ManualDefault noneFormat client-identifier <uniqueidentifier>Mode DHCP Pool Conf

Página 151

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 34Mode DHCP Pool Config 5.8.5.1 no dns-serverThis command removes the DNS Server list.

Página 152

AT8902M Utility CommandsPage 5 - 35 AT8902M CLI Reference ManualDefault 1 (day)Format lease [{<days> [<hours>] [<minutes>] | inf

Página 153

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 365.8.11.1 no domain-nameThis command removes the domain name. Format no domain-nameMod

Página 154

AT8902M Utility CommandsPage 5 - 37 AT8902M CLI Reference ManualDefault inbound interface helper addressesFormat next-server <address>Mode

Página 155

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 38Mode Global Config 5.8.17 ip dhcp ping packetsUse this command to specify the number

Página 156

AT8902M Utility CommandsPage 5 - 39 AT8902M CLI Reference ManualMode Global Config 5.8.20 ip dhcp conflict loggingThis command enables conflict logg

Página 157

Preface AT8902MAT8902M CLI Reference Manual Page xxivHigh Voltage Safety InstructionsSpecial Handling and Unpacking InstructionsDo not handle this pro

Página 158

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 40IP address The IP address of the client. Hardware Address The MAC address or the c

Página 159

AT8902M Utility CommandsPage 5 - 41 AT8902M CLI Reference ManualHost The IP address and the mask for a manual binding to a DHCP client. 5.8.27 show

Página 160

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 425.9 DHCP FilteringYou can configure the DHCP Filtering feature as a security measure a

Página 161

AT8902M Utility CommandsPage 5 - 43 AT8902M CLI Reference Manual5.10 Enhanced Port-Channel / LAG and Multicast Commands5.10.1 port-channel hash multi

Página 162

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 445.10.5 multicast (interface)This command configures the port based multicast handling.

Página 163

AT8902M Utility CommandsPage 5 - 45 AT8902M CLI Reference Manual5.11 Serviceability Packet Tracing CommandsThese commands improve the capability of ne

Página 164

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 46TX A packet transmitted by the device.Intf The interface that the packet went out

Página 165

AT8902M Utility CommandsPage 5 - 47 AT8902M CLI Reference ManualFormat no debug spanning-tree bpdu receiveMode Privileged EXEC5.11.5 debug spannin

Página 166

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 485.11.6.1 no debug igmpsnooping transmitThis command disables tracing of transmitted IG

Página 167

AT8902M Utility CommandsPage 5 - 49 AT8902M CLI Reference ManualFormat debug igmpsnooping packetMode Privileged EXEC5.11.8.1 no debug igmpsnooping

Página 168

AT8902M PrefacePage xxv AT8902M CLI Reference ManualGeneral Instructions on UsageIn order to maintain Kontron’s product warranty, this product must no

Página 169 - Quality of Service Commands

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 50Mode Privileged EXECA sample output of the trace message is shown below.<15> J

Página 170

AT8902M Utility CommandsPage 5 - 51 AT8902M CLI Reference ManualSample outputs of the trace messages are shown below.<15> JAN 02 11:03:31 10.50.

Página 171 - 4.1.3 classofservice trust

Utility Commands AT8902MAT8902M CLI Reference Manual Page 5 - 52I – InitM – MoreMS – Master/SlaveSeq Sequence Number of the DD packet.LS_REQ packet

Página 172

Management CommandsChapter 16Page 6 - 1 AT8902M CLI Reference ManualAT8902M

Página 173

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 26. Management CommandsThis chapter describes the management commands available in th

Página 174 - [<slot/port>]

AT8902M Management CommandsPage 6 - 3 AT8902M CLI Reference Manual6.1.3 serviceport protocolThis command specifies the network management port configu

Página 175 - 4.2.1 diffserv

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 4Mode Privileged EXEC6.1.7.1 no network mac-typeThis command resets the value of MAC

Página 176 - 4.3 DiffServ Class Commands

AT8902M Management CommandsPage 6 - 5 AT8902M CLI Reference ManualIP Address The IP address of the interface. The factory default value is 0.0.0.0 Su

Página 177 - 4.3.5 match class-map

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 6the Global Config mode, you can enter other command modes, including Line Config mod

Página 178 - 4.3.7 match secondary-cos

AT8902M Management CommandsPage 6 - 7 AT8902M CLI Reference ManualSerial Port Login Timeout (minutes) The time, in minutes, of inactivity on a Serial

Página 179 - 4.3.12 match ip precedence

Preface AT8902MAT8902M CLI Reference Manual Page xxviKontron provides for repair or replacement of any part, assembly or sub-assembly at their own dis

Página 180 - 4.3.14 match protocol

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 86.3.3 transport input telnetThis command regulates new Telnet sessions. If enabled,

Página 181 - 4.3.18 match vlan

AT8902M Management CommandsPage 6 - 9 AT8902M CLI Reference Manual6.3.6 session-timeoutThis command sets the Telnet session timeout value.The timeout

Página 182 - 4.4 DiffServ Policy Commands

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 10NOTE: Changing the timeout value for active sessions does not become effec-tive unt

Página 183 - 4.4.6 class

AT8902M Management CommandsPage 6 - 11 AT8902M CLI Reference ManualUser EXECRemote Connection Login Timeout (minutes) This object indicates the numbe

Página 184 - 4.4.9 mark ip-precedence

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 126.4.3.1 no ip ssh server enableThis command disables the IP secure shell server.For

Página 185 - 4.4.11.1 no policy-map

AT8902M Management CommandsPage 6 - 13 AT8902M CLI Reference ManualAdministrative Mode This field indicates whether the administrative mode of SSH is

Página 186 - 4.5 DiffServ Service Commands

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 14Default no passwordFormat users passwd <username> Mode Global Config6.5.

Página 187 - 4.6 DiffServ Show Commands

AT8902M Management CommandsPage 6 - 15 AT8902M CLI Reference Manual6.5.4.1 no users snmpv3 authenticationThis command sets the authentication protocol

Página 188 - 4.6.3 show policy-map

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 16retrieve parameter information. The SNMPv3 access mode may be different than the CL

Página 189

AT8902M Management CommandsPage 6 - 17 AT8902M CLI Reference ManualOtherwise, this value is ANDed with the mask to determine the range of allowed clie

Página 190 - 4.6.4 show diffserv service

Using the Command-Line InterfaceChapter 11Page 1 - 1 AT8902M CLI Reference ManualAT8902M

Página 191 - 4.6.7 show service-policy

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 186.6.5.1 no snmp-server community modeThis command deactivates an SNMP community. If

Página 192 - 4.7.3 {deny

AT8902M Management CommandsPage 6 - 19 AT8902M CLI Reference Manual6.6.9.1 no snmp-server enable trapsThis command disables the Authentication Flag.Fo

Página 193

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 206.6.12.1 no snmp-server enable traps multiusersThis command disables Multiple User

Página 194 - 4.7.5 show mac access-lists

AT8902M Management CommandsPage 6 - 21 AT8902M CLI Reference ManualNOTE: This command does not support a “no” form.Default snmpv2Format snmptrap s

Página 195 - 4.8.1 access-list

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 226.6.19 snmp trap link-status allThis command enables link status traps for all inte

Página 196 - 4.8.1.1 no access-list

AT8902M Management CommandsPage 6 - 23 AT8902M CLI Reference Manual6.6.21 show snmptrapThis command displays SNMP trap receivers. Trap messages are se

Página 197 - 4.8.4 show ip access-lists

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 246.7.1 logging cli-commandThis command enables the CLI command logging feature, whic

Página 198 - 4.8.5 show access-lists

AT8902M Management CommandsPage 6 - 25 AT8902M CLI Reference Manualremove it from the configuration. The IP address you specify must match that of a p

Página 199 - 4.9 ACL trap commands

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 266.8.5 radius server primaryThis command is used to configure the primary RADIUS aut

Página 200

AT8902M Management CommandsPage 6 - 27 AT8902M CLI Reference ManualFormat show radius [servers]Mode Privileged EXECPrimary Server IP Address The c

Página 201 - Utility Commands

Using the Command-Line Interface AT8902MAT8902M CLI Reference Manual Page 1 - 21. Using the Command-Line InterfaceThe command-line interface (CLI) is

Página 202 - 5. Utility Commands

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 28Responses The number of RADIUS packets received on the accounting port from this s

Página 203 - AT8902M Utility Commands

AT8902M Management CommandsPage 6 - 29 AT8902M CLI Reference Manualattributes or unknown types are not included as malformed access responses.Bad Auth

Página 204 - Utility Commands AT8902M

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 306.9.2.1 no tacacs-server keyUse the no tacacs-server key command to disable the aut

Página 205

AT8902M Management CommandsPage 6 - 31 AT8902M CLI Reference ManualDefault 0Format priority <priority>Mode TACACS Config6.9.7 timeoutUse th

Página 206

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 32Any command line that begins with the “!” character is recognized as a comment line

Página 207

AT8902M Management CommandsPage 6 - 33 AT8902M CLI Reference Manual6.10.4 script listThis command lists all scripts present on the switch as well as t

Página 208

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 346.12 Bootcycle commands6.12.1 show boardinfo bootcycleThis command displays whether

Página 209

AT8902M Management CommandsPage 6 - 35 AT8902M CLI Reference ManualMode Privileged EXEC6.13.2 show watchdogThis command displays the watchdog setting

Página 210

Management Commands AT8902MAT8902M CLI Reference Manual Page 6 - 36

Página 211

AT8902MPage A - 1 AT8902M CLI Reference ManualAppendixAGetting Help

Página 212

AT8902M Using the Command-Line InterfacePage 1 - 3 AT8902M CLI Reference ManualThe parameters for a command might include mandatory values, optional v

Página 213

Getting Help AT8902MAT8902M CLI Reference Manual Page A - 2A. Getting HelpIf at any time you encounter difficulties with your application or with any

Página 214

AT8902M Getting HelpPage A - 3 AT8902M CLI Reference ManualRETURNING DEFECTIVE MERCHANDISEBefore returning any merchandise please do one of the follow

Página 215

Getting Help AT8902MAT8902M CLI Reference Manual Page A - 4WHEN RETURNING A UNIT• In the box, you have to include the name and telephone number of a p

Página 216

Return to Manufacturer Authorization Request Contact Name: __________________________________________________________Company Name: _________________

Página 217

Getting Help AT8902MAT8902M CLI Reference Manual Page A - 6

Página 218

AT8902MAT8902M CLI Reference ManualList of CommandsAppendixB

Página 219

List of Commands AT8902MAT8902M CLI Reference Manual Page B - 2B. List of Commands{deny | permit} ...

Página 220

AT8902M List of CommandsPage B - 3 AT8902M CLI Reference Manualclassofservice ip-dscp-mapping ...

Página 221

List of Commands AT8902MAT8902M CLI Reference Manual Page B - 4default-router ...

Página 222

AT8902M List of CommandsPage B - 5 AT8902M CLI Reference Manualhost ...

Página 223

AT8902M Table of Contentsiii AT8902M CLI Reference ManualTable of ContentsRevision History ...

Página 224

Using the Command-Line Interface AT8902MAT8902M CLI Reference Manual Page 1 - 41.3 Slot/Port Naming ConventionFASTPATH software references physical en

Página 225

List of Commands AT8902MAT8902M CLI Reference Manual Page B - 6ip vrrp authentication ...

Página 226

AT8902M List of CommandsPage B - 7 AT8902M CLI Reference Manualmatch protocol ...

Página 227

List of Commands AT8902MAT8902M CLI Reference Manual Page B - 8no arp resptime 3 - 4no arp retries 3 - 4no arp timeout 3 - 5no authentication login

Página 228

AT8902M List of CommandsPage B - 9 AT8902M CLI Reference Manualno dos-control firstfrag 2 - 74no dos-control icmp 2 - 76no dos-control l4port 2 - 7

Página 229

List of Commands AT8902MAT8902M CLI Reference Manual Page B - 10no ip ospf priority 3 - 35no ip ospf retransmit-interval 3 - 35no ip ospf transmit-d

Página 230

AT8902M List of CommandsPage B - 11 AT8902M CLI Reference Manualno mode dot1q-tunnel 2 - 28no mode dvlan-tunnel 2 - 28no monitor ...

Página 231

List of Commands AT8902MAT8902M CLI Reference Manual Page B - 12no set gvrp adminmode 2 - 34no set gvrp interfacemode 2 - 34no set igmp 2 - 60no se

Página 232

AT8902M List of CommandsPage B - 13 AT8902M CLI Reference Manualno spanning-tree mst vlan 2 - 12no spanning-tree port mode 2 - 12no spanning-tree po

Página 233

List of Commands AT8902MAT8902M CLI Reference Manual Page B - 14no vlan pvid 2 - 24no vlan routing 3 - 16no vlan tagging 2 - 24option ...

Página 234

AT8902M List of CommandsPage B - 15 AT8902M CLI Reference Manualscript list ...

Página 235

AT8902M Using the Command-Line InterfacePage 1 - 5 AT8902M CLI Reference Manual1.4 Using the “No” Form of a CommandThe no keyword is a specific form o

Página 236

List of Commands AT8902MAT8902M CLI Reference Manual Page B - 16show boardinfo amc ipmidev ...

Página 237

AT8902M List of CommandsPage B - 17 AT8902M CLI Reference Manualshow ip dhcp filtering ...

Página 238

List of Commands AT8902MAT8902M CLI Reference Manual Page B - 18show logging traplogs ...

Página 239

AT8902M List of CommandsPage B - 19 AT8902M CLI Reference Manualshow storm-control ...

Página 240

List of Commands AT8902MAT8902M CLI Reference Manual Page B - 20sntp unicast client poll-timeout ...

Página 241

AT8902M List of CommandsPage B - 21 AT8902M CLI Reference Manualtimers spf ...

Página 242

Using the Command-Line Interface AT8902MAT8902M CLI Reference Manual Page 1 - 6Table 6 explains how to enter or exit each mode.Line ConfigSwitch (line

Página 243

AT8902M Using the Command-Line InterfacePage 1 - 7 AT8902M CLI Reference ManualGlobal Config From the Privileged EXEC mode, enter configure.To exit to

Página 244

Using the Command-Line Interface AT8902MAT8902M CLI Reference Manual Page 1 - 81.5.1 Command Completion and AbbreviationCommand completion finishes sp

Página 245

AT8902M Using the Command-Line InterfacePage 1 - 9 AT8902M CLI Reference Manual1.6 Using CLI HelpEnter a question mark (?) at the command prompt to di

Página 246

Using the Command-Line Interface AT8902MAT8902M CLI Reference Manual Page 1 - 101.7 Accessing the CLIYou can access the CLI by using a direct console

Página 247

Switching CommandsChapter 12Page 2 - 1 AT8902M CLI Reference ManualAT8902M

Página 248

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 22. Switching CommandsThis chapter describes the switching commands available in the C

Página 249

AT8902M Switching CommandsPage 2 - 3 AT8902M CLI Reference ManualMode Interface Config2.1.2.1 no auto-negotiateThis command disables automatic nego

Página 250

Table of Contents AT8902MAT8902M CLI Reference Manual iv2.1 Port Configuration Commands ...

Página 251

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 4Format no mtuMode Interface Config2.1.6 shutdownThis command disables a port. NO

Página 252

AT8902M Switching CommandsPage 2 - 5 AT8902M CLI Reference Manual2.1.9 speed allThis command sets the speed and duplex setting for all interfaces. For

Página 253 - Management Commands

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 6Mode Privileged EXECGroup Name Displays the group name of an entry in the Protoc

Página 254 - 6. Management Commands

AT8902M Switching CommandsPage 2 - 7 AT8902M CLI Reference Manual2.2.3 spanning-tree configuration nameThis command sets the Configuration Identifier

Página 255 - AT8902M Management Commands

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 82.2.6 spanning-tree forceversionThis command sets the Force Protocol Version paramete

Página 256 - Management Commands AT8902M

AT8902M Switching CommandsPage 2 - 9 AT8902M CLI Reference ManualFormat no spanning-tree hello-timeMode Interface Config2.2.9 spanning-tree max-ag

Página 257

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 10If you specify the external-cost option, this command sets the external-path cost fo

Página 258

AT8902M Switching CommandsPage 2 - 11 AT8902M CLI Reference ManualMode Global Config2.2.12.1 no spanning-tree mst instanceThis command removes a mul

Página 259

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 122.2.14.1 no spanning-tree mst vlanThis command removes an association between a mult

Página 260

AT8902M Switching CommandsPage 2 - 13 AT8902M CLI Reference ManualBridge Identifier The bridge identifier for the CST. It is made up using the bridge

Página 261

AT8902M Table of Contentsv AT8902M CLI Reference Manual2.3.9 vlan participation all ...

Página 262

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 142.2.19 show spanning-tree interfaceThis command displays the settings and parameters

Página 263

AT8902M Switching CommandsPage 2 - 15 AT8902M CLI Reference ManualAuto-Calculate Port Path Cost This indicates whether auto calculation for port path

Página 264

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 162.2.21 show spanning-tree mst port summaryThis command displays the settings of one

Página 265

AT8902M Switching CommandsPage 2 - 17 AT8902M CLI Reference ManualConfiguration Name Identifier used to identify the configuration currently being us

Página 266

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 182.3.3 vlan This command creates a new VLAN and assigns it an ID. The ID is a valid V

Página 267

AT8902M Switching CommandsPage 2 - 19 AT8902M CLI Reference Manual2.3.5.1 no vlan ingressfilterThis command disables ingress filtering. If ingress fil

Página 268

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 20auto The interface is dynamically registered in this VLAN by GVRP. The interface w

Página 269

AT8902M Switching CommandsPage 2 - 21 AT8902M CLI Reference Manualreceiving interface are admitted and forwarded to ports that are members of that VLA

Página 270

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 222.3.14 vlan protocol groupThis command adds protocol-based VLAN groups to the system

Página 271

AT8902M Switching CommandsPage 2 - 23 AT8902M CLI Reference Manual2.3.17.1 no protocol groupThis command removes the <vlanid> from this protocol

Página 272

Table of Contents AT8902MAT8902M CLI Reference Manual vi2.9.1 set gmrp adminmode ...

Página 273

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 242.3.20 vlan pvidThis command changes the VLAN ID per interface.Default 1Format vl

Página 274

AT8902M Switching CommandsPage 2 - 25 AT8902M CLI Reference ManualMode VLAN database2.3.23.1 no vlan association macThis command removes the associa

Página 275

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 26unless a join request is received on this port. This is equivalent to reg-istration

Página 276

AT8902M Switching CommandsPage 2 - 27 AT8902M CLI Reference Manualin the tag. In an untagged frame, the VLAN is the Port VLAN ID spec-ified for the po

Página 277

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 28Default vmanFormat dvlan-tunnel ethertype {802.1Q | vman | custom} [0-65535]Mode

Página 278

AT8902M Switching CommandsPage 2 - 29 AT8902M CLI Reference ManualFormat show dot1q-tunnel [interface {<slot/port> | all}]Modes Privileged E

Página 279

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 30Mode Global Config2.5.2 vlan priorityThis command configures the default 802.1p po

Página 280

AT8902M Switching CommandsPage 2 - 31 AT8902M CLI Reference Manual2.6.2 switchport protected (Interface Config)Use this command to add an interface to

Página 281

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 32Protected Indicates whether the interface is protected or not. It shows TRUE or FA

Página 282

AT8902M Switching CommandsPage 2 - 33 AT8902M CLI Reference Manual2.7.2.1 no set garp timer leaveThis command sets the GVRP leave time on all ports or

Página 283

AT8902M Table of Contentsvii AT8902M CLI Reference Manual2.12.4 deleteport (Global Config) ...

Página 284

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 34NOTE: If GVRP is disabled, the system does not forward GVRP messages.2.8.1 set gvrp

Página 285

AT8902M Switching CommandsPage 2 - 35 AT8902M CLI Reference Manual20 centiseconds (0.2 seconds). The finest granularity of specification is one centis

Página 286

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 362.9.2 set gmrp interfacemodeThis command enables GARP Multicast Registration Protoco

Página 287

AT8902M Switching CommandsPage 2 - 37 AT8902M CLI Reference Manual600 centiseconds (0.2 to 6.0 seconds). The factory default is 60 centi-seconds (0.6

Página 288

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 38of authentication login methods is three. The possible method values are local, radi

Página 289 - Getting Help

AT8902M Switching CommandsPage 2 - 39 AT8902M CLI Reference Manualassigned to a specific user if the user is configured locally. If this value is not

Página 290 - A. Getting Help

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 40Default autoFormat dot1x port-control {force-unauthorized | force-autho-rized | a

Página 291 - AT8902M Getting Help

AT8902M Switching CommandsPage 2 - 41 AT8902M CLI Reference Manual2.10.11.1 no dot1x re-authenticationThis command disables re-authentication of the s

Página 292 - Getting Help AT8902M

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 42Format dot1x timeout {{reauth-period <seconds>} | {quiet-period <seconds&

Página 293 - (if not under warranty)

AT8902M Switching CommandsPage 2 - 43 AT8902M CLI Reference ManualFormat users login <user> <listname>Mode Global Config2.10.17 show a

Página 294

Table of Contents AT8902MAT8902M CLI Reference Manual viii2.17.3 lldp timers ...

Página 295 - List of Commands

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 44Port The interface whose configuration is displayed.Control Mode The configured c

Página 296 - B. List of Commands

AT8902M Switching CommandsPage 2 - 45 AT8902M CLI Reference ManualThe value is expressed in seconds and will be in the range of 1 and 65535.Reauthenti

Página 297 - AT8902M List of Commands

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 46Format show dot1x users <slot/port>Mode Privileged EXECUser Users config

Página 298 - List of Commands AT8902M

AT8902M Switching CommandsPage 2 - 47 AT8902M CLI Reference Manualingressing on an interface increases beyond the configured threshold, the traffic is

Página 299

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 48Format no storm-control broadcast all level Mode Global Config2.11.5 storm-contr

Página 300

AT8902M Switching CommandsPage 2 - 49 AT8902M CLI Reference ManualFormat storm-control multicast allMode Global Config2.11.7.1 no storm-control mu

Página 301

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 502.11.10 storm-control unicast levelThis command configures the unicast storm recover

Página 302

AT8902M Switching CommandsPage 2 - 51 AT8902M CLI Reference ManualMode Global Config2.11.12.1 no storm-control unicast all levelThis command returns

Página 303

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 52Ucast Level Shows the Unknown Unicast or DLF (Destination Lookup Failure) storm co

Página 304

AT8902M Switching CommandsPage 2 - 53 AT8902M CLI Reference ManualMode Interface Config2.12.3 deleteport (Interface Config)This command deletes the

Página 305

AT8902M Table of Contentsix AT8902M CLI Reference Manual3.1.12 show arp switch ...

Página 306

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 54Format no port lacpmode Mode Interface Config2.12.7 port lacpmode all This com

Página 307

AT8902M Switching CommandsPage 2 - 55 AT8902M CLI Reference Manual2.12.10 port-channel nameThis command defines a name for the port-channel (LAG). The

Página 308

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 56Mbr Ports A listing of the ports that are members of this port-channel (LAG), in s

Página 309

AT8902M Switching CommandsPage 2 - 57 AT8902M CLI Reference Manual2.13.2 no monitor This command removes all the source ports and a destination port f

Página 310

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 58Format macfilter <macaddr> <vlanid> Mode Global Config2.14.1.1 no ma

Página 311

AT8902M Switching CommandsPage 2 - 59 AT8902M CLI Reference ManualMode Global Config2.14.4 show mac-address-table static This command displays the S

Página 312

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 60If an interface has IGMP Snooping enabled and you enable this interface for routing

Página 313

AT8902M Switching CommandsPage 2 - 61 AT8902M CLI Reference Manualremove the layer 2 LAN interface from its forwarding table entry upon receiving an I

Página 314

Switching Commands AT8902MAT8902M CLI Reference Manual Page 2 - 62report for a particular group in that interface. This value must be less than the IG

Página 315

AT8902M Switching CommandsPage 2 - 63 AT8902M CLI Reference ManualFormat no set igmp mrouter <vlanid>Mode Interface Config2.15.8 set igmp mr

Comentários a estes Manuais

Sem comentários