Kontron CP6004-RC Manual do Utilizador Página 37

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 42
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 36
CP6004-RA/-RC Introduction
ID 1055-1509, Rev. 1.0 Page 1 - 17
D R A F T — F O R I N T E R N A L U S E O N L Y
Timer
Watchdog Timer Software-configurable, two-stage Watchdog with programmable timeout
ranging from 125 ms to 4096 s in 16 steps
Serves for generating IRQ or hardware reset
System Timer
The Intel® QM77 Chipset contains three 8254-style counters which
have fixed uses
In addition to the three 8254-style counters, the Intel® QM77 Chipset in-
cludes eight individual high-precision event timers that may be used by
the operating system. They are implemented as a single counter each
with its own comparator and value register.
IPMI
IPMI Controller NXP® ARM7 microcontroller with redundant 512 kB firmware flash and
automatic roll-back strategy
The IPMI controller carries out IPMI commands such as monitoring sev-
eral onboard temperature conditions, board voltages and the power
supply status, and managing hot swap operations.
The IPMI controller is accessible via two IPMBs (through the J1 and J2
connectors) and one host Keyboard Controller Style (KCS) interface.
Thermal
Thermal Management CPU and board overtemperature protection is provided by:
Temperature sensors integrated in the 3
rd
generation Intel® Core i7
processor:
One temperature sensor for monitoring each processor core
One temperature sensor for monitoring the graphics core
One temperature sensor for monitoring the package die temperature
One temperature sensor integrated in the Inte QM77 Chipset for mon-
itoring the chipset
One onboard temperature sensor for monitoring the board temperature
Specially designed heat sink
Security
TPM Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-
based data and system security (on request)
Table 1-2: CP6004-RA/-RC Main Specifications (Continued)
FEATURES SPECIFICATIONS
Vista de página 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42

Comentários a estes Manuais

Sem comentários