Kontron CP6004-RC Manual do Utilizador Página 24

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 42
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 23
Introduction CP6004-RA/-RC
Page 1 - 4 ID 1055-1509, Rev. 1.0
D R A F T — F O R I N T E R N A L U S E O N L Y
1.2 CP6004-RA Board-Specific Information
The CP6004-RA is a rugged air-cooled CompactPCI single-board computer with front I/O. It is
based on the 3
rd
generation Intel® Core™ i7 processor and specifically designed for use in
highly integrated platforms with solid mechanical interfacing for a wide range of industrial
environment applications.
Support for the following 3
rd
generation processors:
Intel® Core™ i7-3612QE (SV) quad-core processor, 2.1 GHz, 6 MB L3 cache
Intel® Core™ i7-3555LE (LV)
dual-core processor
, 2.5 GHz, 4 MB L3 cache
Intel® QM77 Express Chipset
Up to 16 GB, dual-channel, soldered DDR3 SDRAM memory with ECC running at 1600 MHz
Integrated 3D high-performance graphics controller with up to four high-resolution graphics
interfaces (VGA / DP / 2 x HDMI/DVI)
64-bit/66 MHz PCI or PCI-X CompactPCI interface (PICMG 2.0)
One PMC slot with PCI functionality and rear I/O support; 64-bit/66 MHz PCI interface or
64-bit/133 MHz PCI-X interface
One XMC slot utilizing a x8 lane PCI Express 2.0 interconnection
Five Gigabit Ethernet interfaces:
Two Gigabit Ethernet interfaces switchable between front I/O and rear I/O
Two Gigabit Ethernet interfaces on rear I/O (PICMG 2.16)
One Gigabit Ethernet interface on front I/O
Two Gigabit Ethernet (GbE) controllers:
One Intel® 82579LM Gigabit Ethernet controller connected to one GbE port on the front panel
One Intel® 82580EB Quad Gigabit Ethernet controller connected to two GbE ports on
the front panel and two GbE ports on the rear I/O
Five Serial ATA interfaces with SATA RAID 0/1/5/10 support:
One onboard SATA 6 Gb/s interface for the Serial ATA Flash module
Four SATA 3 Gb/s interfaces on the rear I/O
Six USB ports:
Two USB 2.0 ports on the front panel
Four USB 2.0 ports on the rear I/O
Two COM ports:
One RS-232 COM port either on the front panel or on the rear I/O (COMA)
One RS-422/RS-232 COM port on the rear I/O (COMB)
TCG 1.2 compliant Trusted Platform Module (TPM), on request
Two SPI boot flashes:
One standard SPI boot flash
One recovery SPI boot flash
Four general purpose inputs (GPI) and four general purpose outputs (GPO) on rear I/O
Watchdog timer
Battery-backed real-time clock
Three onboard DIP switches for board configuration
Supports PICMG Packet Switching Backplane Specification 2.16
IPMI support
4HP, 6U CompactPCI
Passive heat sink solution for forced airflow cooling
Rear I/O on J3, J4 and J5
Hot swap capability: as system controller or as peripheral device
AMI Aptio®, a uEFI-compliant platform firmware
Vista de página 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 41 42

Comentários a estes Manuais

Sem comentários