Kontron AT890X Full-Size CLI Manual do Utilizador

AT8901/2/3 CLI Reference ManualAdvancedTCAM5301_TECH_2 Manual ID1.3 Revision Index26 April, 2006 Date of Issue

AT8901/2/3AT8901/2/3 CLI Reference Manual Page 0 - 22.2.8 spanning-tree hello-time ...2

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 662.16.3 port-security max-staticThis command sets the maximum number of statica

AT8901/2/3 Switching CommandsPage 2 - 67 AT8901/2/3 CLI Reference ManualAdmin Mode Port Locking mode for the Interface.Dynamic Limit Maximum dynami

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 68Format no lldp transmitMode Interface Config2.17.2 lldp receiveUse this co

AT8901/2/3 Switching CommandsPage 2 - 69 AT8901/2/3 CLI Reference ManualFormat lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]Mode I

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 70Format lldp notification-interval <interval>Mode Global Config2.17.7

AT8901/2/3 Switching CommandsPage 2 - 71 AT8901/2/3 CLI Reference ManualNotify Shows whether the interface sends remote data change notifications.TL

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 72Chassis ID Shows the ID of the remote device.Port ID Shows the port number

AT8901/2/3 Switching CommandsPage 2 - 73 AT8901/2/3 CLI Reference Manual2.17.16 show lldp local-device detailUse this command to display detailed info

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 74Format dos-control sipdipMode Global Config2.18.1.1 no dos-control sipdipT

AT8901/2/3 Switching CommandsPage 2 - 75 AT8901/2/3 CLI Reference Manual2.18.4 dos-control tcpflagThis command enables TCP Flag Denial of Service prot

AT8901/2/3Page 0 - 3 AT8901/2/3 CLI Reference Manual2.4 Double VLAN Commands ... 2

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 76Mode Global Config2.18.6.1 no dos-control icmpThis command disables Maximum

AT8901/2/3 Switching CommandsPage 2 - 77 AT8901/2/3 CLI Reference ManualDefault all Format show forwardingdb agetime [fdbid | all]Mode Privilege

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 78Most MFDB Entries Ever Used Displays the largest number of entries that have

Routing CommandsChapter 13Page 3 - 1 AT8901/2/3 CLI Reference ManualAT8901/2/3

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 23. Routing CommandsThis chapter describes the routing commands available in the C

AT8901/2/3 Routing CommandsPage 3 - 3 AT8901/2/3 CLI Reference Manual3.1.2 ip proxy-arpThis command enables proxy ARP on a router interface. Without p

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 43.1.5 arp purgeThis command causes the specified IP address to be removed from th

AT8901/2/3 Routing CommandsPage 3 - 5 AT8901/2/3 CLI Reference ManualMode Global Config3.1.8.1 no arp timeoutThis command configures the default ARP

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 6Type Is the type that was configured into the unit. The possible values are Loc

AT8901/2/3 Routing CommandsPage 3 - 7 AT8901/2/3 CLI Reference Manual3.2.1 routing This command enables IPv4 and IPv6 routing for an interface. You ca

AT8901/2/3AT8901/2/3 CLI Reference Manual Page 0 - 42.10.16 users login ...

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 8Mode Interface Config3.2.4 ip routeThis command configures a static route. Th

AT8901/2/3 Routing CommandsPage 3 - 9 AT8901/2/3 CLI Reference ManualFormat no ip route default [{<nexthopip> | <preference>}]Mode Glo

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 103.2.8.1 no ip netdirbcast This command disables the forwarding of network-direct

AT8901/2/3 Routing CommandsPage 3 - 11 AT8901/2/3 CLI Reference ManualNOTE: Routed frames are always ethernet encapsulated when a frame is routed to a

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 12Encapsulation Type Is the encapsulation type for the specified interface. The t

AT8901/2/3 Routing CommandsPage 3 - 13 AT8901/2/3 CLI Reference ManualIP-Address/Mask The IP-Address and mask of the destination network correspond-i

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 14RIP This field displays the RIP route preference value.BGP4 This field disp

AT8901/2/3 Routing CommandsPage 3 - 15 AT8901/2/3 CLI Reference ManualFormat no ip irdp addressMode Interface Config3.3.3 ip irdp holdtime This co

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 16Format no ip irdp minadvertintervalMode Interface Config3.3.6 ip irdp prefe

AT8901/2/3 Routing CommandsPage 3 - 17 AT8901/2/3 CLI Reference Manual3.4 Virtual LAN Routing CommandsThis section describes the commands you use to v

AT8901/2/3Page 0 - 5 AT8901/2/3 CLI Reference Manual2.15.1 set igmp ...

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 18interface. The parameter <vrid> is the virtual router ID which has an inte

AT8901/2/3 Routing CommandsPage 3 - 19 AT8901/2/3 CLI Reference Manual3.5.4 ip vrrp authenticationThis command sets the authorization details value fo

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 203.5.6.1 no ip vrrp priorityThis command sets the default priority value for the

AT8901/2/3 Routing CommandsPage 3 - 21 AT8901/2/3 CLI Reference ManualZero Priority Packets Sent Represents the total number of VRRP packets sent by

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 22Advertisement interval Represents the advertisement interval for the specific v

AT8901/2/3 Routing CommandsPage 3 - 23 AT8901/2/3 CLI Reference ManualDefault disabledFormat bootpdhcprelay enableMode Global Config3.6.2.1 no bo

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 243.6.5 bootpdhcprelay serveripThis command configures the server IP Address for B

AT8901/2/3 Routing CommandsPage 3 - 25 AT8901/2/3 CLI Reference ManualDefault enabled Format enableMode Router OSPF Config3.7.2.1 no enable (OSPF

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 263.7.6 area nssa (OSPF)This command configures the specified areaid to function a

AT8901/2/3 Routing CommandsPage 3 - 27 AT8901/2/3 CLI Reference Manual3.7.11 area nssa translator-stab-intv (OSPF)This command configures the translat

AT8901/2/3AT8901/2/3 CLI Reference Manual Page 0 - 62.18.6 dos-control icmp ...

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 28Format area <areaid> stub no-summaryMode Router OSPF Config3.7.14.1 no

AT8901/2/3 Routing CommandsPage 3 - 29 AT8901/2/3 CLI Reference ManualMode Router OSPF Config3.7.17 area virtual-link dead-interval (OSPF)This comma

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 303.7.19.1 no area virtual-link retransmit-intervalThis command configures the def

AT8901/2/3 Routing CommandsPage 3 - 31 AT8901/2/3 CLI Reference Manual3.7.22.1 no default-metric (OSPF)This command is used to set a default for the m

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 32leave the Overflow State. This allows the router to again originate non-default

AT8901/2/3 Routing CommandsPage 3 - 33 AT8901/2/3 CLI Reference ManualThe authentication key must be 8 bytes or less if the authentication type is sim

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 343.7.31 ip ospf hello-interval This command sets the OSPF hello interval for the

AT8901/2/3 Routing CommandsPage 3 - 35 AT8901/2/3 CLI Reference ManualMode Interface Config3.7.34 ip ospf transmit-delay This command sets the OSPF

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 36Default metric—unspecifiedtype—2tag—0Format redistribute {rip | bgp | static

AT8901/2/3 Routing CommandsPage 3 - 37 AT8901/2/3 CLI Reference Manual3.7.40.1 no trapflags This command disables OSPF traps. Format no trapflags Mod

AT8901/2/3Page 0 - 7 AT8901/2/3 CLI Reference Manual3.3.1 ip irdp ...

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 38Metric Shows the metric for the advertised default routes. If the metric is no

AT8901/2/3 Routing CommandsPage 3 - 39 AT8901/2/3 CLI Reference ManualRedistribute into NSSA Shows whether to redistribute information into the NSSA.

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 40Use network to display the network LSAs. Use nssa-external to display NSSA exter

AT8901/2/3 Routing CommandsPage 3 - 41 AT8901/2/3 CLI Reference ManualSubtotal Number of entries for the identified area.Total Number of entries f

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 423.7.47 show ip ospf interface briefThis command displays brief information for t

AT8901/2/3 Routing CommandsPage 3 - 43 AT8901/2/3 CLI Reference ManualNeighbor Events The number of times this neighbor relationship has changed sta

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 44 Full - the neighboring routers are fully adjacent and they will now appear in

AT8901/2/3 Routing CommandsPage 3 - 45 AT8901/2/3 CLI Reference Manual3.7.51 show ip ospf statisticsThis command displays information about recent Sho

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 46Hello Interval The configured hello interval for the OSPF virtual interface.Dea

AT8901/2/3 Routing CommandsPage 3 - 47 AT8901/2/3 CLI Reference ManualMode Router RIP Config3.8.2.1 no enable (RIP)This command sets the administrat

AT8901/2/3AT8901/2/3 CLI Reference Manual Page 0 - 83.7.16 area virtual-link authentication ...3 -

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 483.8.6 default-metric (RIP)This command is used to set a default for the metric o

AT8901/2/3 Routing CommandsPage 3 - 49 AT8901/2/3 CLI Reference Manual3.8.9 ip rip authentication This command sets the RIP Version 2 Authentication T

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 50Format ip rip send version {rip1 | rip1c | rip2 | none}Mode Interface Config

AT8901/2/3 Routing CommandsPage 3 - 51 AT8901/2/3 CLI Reference Manualadded to any match types presently being redistributed. Internal routes are redi

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 523.8.16 show ip rip interface briefThis command displays general information for

AT8901/2/3 Routing CommandsPage 3 - 53 AT8901/2/3 CLI Reference ManualBad Packets Received The number of RIP response packets received by the RIP pr

Routing Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 3 - 54

Quality of Service CommandsChapter 14Page 4 - 1 AT8901/2/3 CLI Reference ManualAT8901/2/3

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 24. Quality of Service (QoS) CommandsThis chapter describes the Q

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 3 AT8901/2/3 CLI Reference Manual4.1.2 classofservice ip-precedence-mappingThis command maps an I

AT8901/2/3Page 0 - 9 AT8901/2/3 CLI Reference Manual3.8.7 distance rip ...

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 4Default dot1pFormat classofservice trust {dot1p | ip-dscp | i

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 5 AT8901/2/3 CLI Reference Manual4.1.7 traffic-shapeThis command specifies the maximum transmissi

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 64.1.10 show classofservice ip-dscp-mappingThis command displays

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 7 AT8901/2/3 CLI Reference ManualIf you specify the interface, the command also displays the foll

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 8updates the 802.1p user priority field contained in the VLAN tag

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 9 AT8901/2/3 CLI Reference ManualFormat class-map match-all <class-map-name>Mode Global

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 10Format match class-map <refclassname>Mode Class-Map C

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 11 AT8901/2/3 CLI Reference Manual4.3.8 match destination-address macThis command adds to the spe

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 12Default noneFormat match ip dscp <dscpval>Mode Class

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 13 AT8901/2/3 CLI Reference ManualTo specify the match condition using a numeric value notation,

AT8901/2/3AT8901/2/3 CLI Reference Manual Page 0 - 104.3.13 match ip tos ...

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 144.3.18 match vlanThis command adds to the specified class defin

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 15 AT8901/2/3 CLI Reference Manual4.4.1 assign-queueThis command modifies the queue id to which t

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 16Mode Policy-Class-Map Config4.4.6 class This command creates

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 17 AT8901/2/3 CLI Reference Manual4.4.9 mark ip-precedenceThis command marks all packets for the

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 184.4.11.1 no policy-mapThis command eliminates an existing DiffS

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 19 AT8901/2/3 CLI Reference ManualNOTE: Each interface can have one policy attached.4.5.1.1 no se

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 20Class Name The name of this class. (Note that the order in wh

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 21 AT8901/2/3 CLI Reference ManualPolicy Name The name of this policy.Type The policy type (O

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 22Non-Conform DSCP Value This field displays the DSCP mark value

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 23 AT8901/2/3 CLI Reference ManualDiffServ Mode The current setting of the DiffServ administrati

AT8901/2/3Page 0 - 11 AT8901/2/3 CLI Reference ManualChapter55. Utility Commands ...

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 24 4.7 MAC Access Control List (ACL) CommandsThis section descri

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 25 AT8901/2/3 CLI Reference Manual4.7.3 {deny | permit} This command creates a new rule for the c

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 26For the Broadcom 5650x platform, the mirror parameter allows th

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 27 AT8901/2/3 CLI Reference ManualFormat show mac access-lists [name]Mode Privileged EXECRul

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 28Format access-list <1-99> {deny | permit} {every | <

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 29 AT8901/2/3 CLI Reference Manual4.8.1.1 no access-listThis command deletes an IP ACL that is id

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 30Mode Global Config4.8.3.1 no acl-trapflagsThis command disabl

AT8901/2/3 Quality of Service (QoS) CommandsPage 4 - 31 AT8901/2/3 CLI Reference Manual4.8.5 show access-listsThis command displays IP ACLs and MAC ac

Quality of Service (QoS) Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 4 - 32

Utility CommandsChapter 15Page 5 - 1 AT8901/2/3 CLI Reference ManualAT8901/2/3

AT8901/2/3 PrefacePage ii AT8901/2/3 CLI Reference ManualRevision HistoryImprintKontron may be contacted via the following:Kontron Canada, Inc. Kontro

AT8901/2/3AT8901/2/3 CLI Reference Manual Page 0 - 125.4.18 show boardinfo ipmidev ...5

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 25. Utility CommandsThis chapter describes the utility commands available in the C

AT8901/2/3 Utility CommandsPage 5 - 3 AT8901/2/3 CLI Reference Manual5.2.1 download applicationThis command copies an application tgz from <source-

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 4Format download bootloader <url>Mode Privileged EXECEXEC5.2.7 show star

AT8901/2/3 Utility CommandsPage 5 - 5 AT8901/2/3 CLI Reference Manual5.3.2 set board ipmi-controller debugThis command enables temporary IPMI controll

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 6NOTE: Only one extension interface can exist on a AT89015.3.5.1 no atca port over

AT8901/2/3 Utility CommandsPage 5 - 7 AT8901/2/3 CLI Reference ManualInterface For a service port the output is Management. For a network port, the

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 8Burned in MAC Address Universally assigned network address.Software Version The

AT8901/2/3 Utility CommandsPage 5 - 9 AT8901/2/3 CLI Reference ManualTransmit Packet Errors The number of outbound packets that could not be transmit

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 10octets in length inclusive (excluding framing bits but including FCS octets). Pa

AT8901/2/3 Utility CommandsPage 5 - 11 AT8901/2/3 CLI Reference ManualTotal Packets Received Without Error - The total number of pack-ets received tha

AT8901/2/3Page 0 - 13 AT8901/2/3 CLI Reference Manual5.8.6 sntp unicast client poll-retry ... 5

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 12Unacceptable Frame Type - The number of frames discarded from this port due to b

AT8901/2/3 Utility CommandsPage 5 - 13 AT8901/2/3 CLI Reference Manual Total - The number of frames that have been transmitted by this port to its s

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 14GVRP Failed Registrations - The number of times attempted GVRP registrations cou

AT8901/2/3 Utility CommandsPage 5 - 15 AT8901/2/3 CLI Reference Manualbeing deliverable to a higher-layer protocol. A possible reason for dis-carding

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 16Format show mac-addr-table [<macaddr> | all]Mode Privileged EXEC Mac A

AT8901/2/3 Utility CommandsPage 5 - 17 AT8901/2/3 CLI Reference Manual5.4.9 show sysinfoThis command displays switch information. Format show sysinfo

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 18Mode Privileged EXECNOTE: It might take a while to get an output of the “show

AT8901/2/3 Utility CommandsPage 5 - 19 AT8901/2/3 CLI Reference Manual5.4.16 show boardinfo addressThis command displays the global address info of th

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 20Mode Privileged EXEC5.4.23 show boardinfo routingThis commands shows which int

AT8901/2/3 Utility CommandsPage 5 - 21 AT8901/2/3 CLI Reference Manualkeywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice

AT8901/2/3AT8901/2/3 CLI Reference Manual Page 0 - 146.1 Network Interface Commands ...

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 225.5.7 logging syslogThis command enables syslog logging. The <portid> para

AT8901/2/3 Utility CommandsPage 5 - 23 AT8901/2/3 CLI Reference Manual5.5.10 show logging hostsThis command displays all configured logging hosts.Form

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 245.6.1 traceroute Use the traceroute command to discover the routes that packets

AT8901/2/3 Utility CommandsPage 5 - 25 AT8901/2/3 CLI Reference Manual5.6.7 clear traplogThis command clears the trap log.Format clear traplog Mode

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 265.6.13 pingThis command checks if another computer is on the network and listens

AT8901/2/3 Utility CommandsPage 5 - 27 AT8901/2/3 CLI Reference ManualTable 8. Copy ParametersSource Destination Descriptionnvram:clibanner <url>

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 285.7 Keying for Advanced FeaturesThis section describes the commands you use to e

AT8901/2/3 Utility CommandsPage 5 - 29 AT8901/2/3 CLI Reference Manual5.8.1 sntp broadcast client poll-intervalThis command sets the poll interval for

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 30Default 6Format sntp unicast client poll-interval <poll-interval>Mode

AT8901/2/3 Utility CommandsPage 5 - 31 AT8901/2/3 CLI Reference Manual5.8.7.1 no sntp multicast client poll-intervalThis command resets the poll inter

AT8901/2/3Page 0 - 15 AT8901/2/3 CLI Reference Manual6.6.1 snmp-server ...

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 32Poll Timeout Poll timeout value in seconds for SNTP clients.Poll Retry Poll

AT8901/2/3 Utility CommandsPage 5 - 33 AT8901/2/3 CLI Reference Manual5.9.1.1 no ip dhcp poolThis command removes the DHCP address pool. The name shou

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 34Format default-router <address1> [<address2>...<address8>]M

AT8901/2/3 Utility CommandsPage 5 - 35 AT8901/2/3 CLI Reference ManualFormat host <address> [{<mask> | <prefix-length>}]Mode DHC

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 36Format bootfile <filename>Mode DHCP Pool Config 5.9.10.1 no bootfileTh

AT8901/2/3 Utility CommandsPage 5 - 37 AT8901/2/3 CLI Reference Manual• p-node—Peer-to-peer• m-node—Mixed• h-node—Hybrid (recommended)Default noneFo

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 38Format no option <code>Mode DHCP Pool Config5.9.16 ip dhcp excluded-ad

AT8901/2/3 Utility CommandsPage 5 - 39 AT8901/2/3 CLI Reference Manual5.9.18.1 no service dhcpThis command disables the DHCP server. Format no servic

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 405.9.22 clear ip dhcp server statisticsThis command clears DHCP server statistics

AT8901/2/3 Utility CommandsPage 5 - 41 AT8901/2/3 CLI Reference Manual5.9.26 show ip dhcp pool configurationThis command displays pool configuration.

AT8901/2/3AT8901/2/3 CLI Reference Manual Page 0 - 166.9.8 show tacacs ...

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 42DHCP RELEASE The number of DHCPRELEASE messages the server has received.DHCP IN

AT8901/2/3 Utility CommandsPage 5 - 43 AT8901/2/3 CLI Reference Manual5.10.2 ip dhcp filtering trustThis command configures an interface as trusted.De

Utility Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 5 - 44

Management CommandsChapter 16Page 6 - 1 AT8901/2/3 CLI Reference ManualAT8901/2/3

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 26. Management CommandsThis chapter describes the management commands available

AT8901/2/3 Management CommandsPage 6 - 3 AT8901/2/3 CLI Reference Manual6.1.3 serviceport protocolThis command specifies the network management port c

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 4Default burnedinFormat network mac-type {local | burnedin}Mode Privileged

AT8901/2/3 Management CommandsPage 6 - 5 AT8901/2/3 CLI Reference ManualLocally Administered MAC Address If desired, a locally administered MAC addre

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 6the Global Config mode, you can enter other command modes, including Line Conf

AT8901/2/3 Management CommandsPage 6 - 7 AT8901/2/3 CLI Reference ManualModes Privileged EXECUser EXECSerial Port Login Timeout (minutes) Specifies

Using the Command-Line InterfaceChapter 11Page 1 - 1 AT8901/2/3 CLI Reference ManualAT8901/2/3

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 8outbound Telnet operational mode as ‘linemode’, where by default, the operatio

AT8901/2/3 Management CommandsPage 6 - 9 AT8901/2/3 CLI Reference ManualMode Line Config6.3.5.1 no session-limitThis command sets the maximum numbe

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 10NOTE: When you change the timeout value, the new value is applied to all acti

AT8901/2/3 Management CommandsPage 6 - 11 AT8901/2/3 CLI Reference ManualRemote Connection Login Timeout (minutes) This object indicates the number o

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 126.4.3.1 no ip ssh server enableThis command disables the IP secure shell serv

AT8901/2/3 Management CommandsPage 6 - 13 AT8901/2/3 CLI Reference ManualMode Privileged EXECAdministrative Mode This field indicates whether the a

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 14Format users passwd <username> Mode Global Config6.5.2.1 no users p

AT8901/2/3 Management CommandsPage 6 - 15 AT8901/2/3 CLI Reference Manual6.5.4.1 no users snmpv3 authenticationThis command sets the authentication pr

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 166.5.7 show usersThis command displays the configured user names and their set

AT8901/2/3 Management CommandsPage 6 - 17 AT8901/2/3 CLI Reference Manualsnmp-server bind networkno snmp-server bind serviceportno snmp-server bind ne

Using the Command-Line Interface AT8901/2/3AT8901/2/3 CLI Reference Manual Page 1 - 21. Using the Command-Line InterfaceThe command-line interface (CL

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 186.6.5 snmp-server community ipmaskThis command sets a client IP mask for an S

AT8901/2/3 Management CommandsPage 6 - 19 AT8901/2/3 CLI Reference ManualMode Global Config6.6.8 snmp-server community rwThis command restricts acce

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 206.6.11.1 no snmp-server enable traps bcaststormThis command disables the broa

AT8901/2/3 Management CommandsPage 6 - 21 AT8901/2/3 CLI Reference Manual6.6.14.1 no snmp-server enable traps stpmodeThis command disables the sending

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 22Format snmptrap ipaddr <name> <ipaddrold> <ipaddrnew>Mode

AT8901/2/3 Management CommandsPage 6 - 23 AT8901/2/3 CLI Reference ManualNOTE: This command is valid only when the Link Up/Down Flag is enabled. See 6

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 24Format show snmptrapMode Privileged EXECSNMP Trap Name The community str

AT8901/2/3 Management CommandsPage 6 - 25 AT8901/2/3 CLI Reference Manual6.7.1 logging cli-commandThis command enables the CLI command logging feature

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 26If you use the <acct> token, the command configures the IP address to u

AT8901/2/3 Management CommandsPage 6 - 27 AT8901/2/3 CLI Reference ManualFormat no radius server msgauth <ipaddr>Mode Global Config6.8.5 ra

AT8901/2/3 Using the Command-Line InterfacePage 1 - 3 AT8901/2/3 CLI Reference ManualThe parameters for a command might include mandatory values, opti

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 286.8.8 show radiusThis command is used to display the various RADIUS configura

AT8901/2/3 Management CommandsPage 6 - 29 AT8901/2/3 CLI Reference ManualAccounting Server IP Address IP Address of the configured RADIUS accounting

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 30Access Retransmission The number of RADIUS Access-Request packets retransmit

AT8901/2/3 Management CommandsPage 6 - 31 AT8901/2/3 CLI Reference Manual6.9.1.1 no tacacs-server hostUse the no tacacs-server host command to delete

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 32<key-string> parameter specifies the key name. For an empty string use

AT8901/2/3 Management CommandsPage 6 - 33 AT8901/2/3 CLI Reference Manual6.10 Configuration Scripting CommandsConfiguration Scripting allows you to ge

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 34These connections may create bridging loops when enabled. During normal opera

AT8901/2/3 Management CommandsPage 6 - 35 AT8901/2/3 CLI Reference Manual6.11 Pre-login Banner and System Prompt CommandsThis section describes the co

Management Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 6 - 366.12.2 set watchdogThis command configures the watchdog. It sets the timeout

AT8901/2/3 Getting HelpPage A - 1 AT8901/2/3 CLI Reference ManualAppendixAGetting Help

Using the Command-Line Interface AT8901/2/3AT8901/2/3 CLI Reference Manual Page 1 - 41.3 Slot/Port Naming ConventionFASTPATH software references physi

Getting Help AT8901/2/3AT8901/2/3 CLI Reference Manual Page A - 2A. Getting HelpIf at any time you encounter difficulties with your application or wit

AT8901/2/3 Getting HelpPage A - 3 AT8901/2/3 CLI Reference ManualRETURNING DEFECTIVE MERCHANDISEBefore returning any merchandise please do one of the

Getting Help AT8901/2/3AT8901/2/3 CLI Reference Manual Page A - 4WHEN RETURNING A UNIT• In the box, you have to include the name and telephone number

Return to Manufacturer Authorization Request Contact Name: __________________________________________________________Company Name: _________________

Getting Help AT8901/2/3AT8901/2/3 CLI Reference Manual Page A - 6

AT8901/2/3AT8901/2/3 CLI Reference ManualList of CommandsAppendixB

List of Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page B - 2B. List of Commands{deny | permit} 4 - 251583compatibility 3 - 25access-list 4

AT8901/2/3 List of CommandsPage B - 3 AT8901/2/3 CLI Reference Manualclass-map 4 - 8class-map rename 4 - 9classofservice dot1p-mapping 4 - 2classof

List of Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page B - 4distribute-list out (OSPF) 3 - 31distribute-list out (RIP) 3 - 48dns-server 5

AT8901/2/3 List of CommandsPage B - 5 AT8901/2/3 CLI Reference Manualip dhcp excluded-address 5 - 38ip dhcp filtering 5 - 42ip dhcp filtering trust

AT8901/2/3 Using the Command-Line InterfacePage 1 - 5 AT8901/2/3 CLI Reference Manual1.4 Using the “No” Form of a CommandThe no keyword is a specific

List of Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page B - 6license advanced 5 - 28lineconfig 6 - 6lldp notification 2 - 69lldp notificati

AT8901/2/3 List of CommandsPage B - 7 AT8901/2/3 CLI Reference Manualmode dot1q-tunnel 2 - 28mode dvlan-tunnel 2 - 28monitor session 2 - 56mtu 2 -

List of Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page B - 8no class-map 4 - 9no classofservice dot1p-mapping 4 - 2no classofservice ip-dsc

AT8901/2/3 List of CommandsPage B - 9 AT8901/2/3 CLI Reference Manualno ip dhcp excluded-address 5 - 38no ip dhcp filtering 5 - 42no ip dhcp filteri

List of Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page B - 10no lldp timers 2 - 68no lldp transmit 2 - 67no lldp transmit-mgmt 2 - 69no ll

AT8901/2/3 List of CommandsPage B - 11 AT8901/2/3 CLI Reference Manualno radius server msgauth 6 - 26no radius server retransmit 6 - 27no radius ser

List of Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page B - 12no sntp client port 5 - 29no sntp multicast client poll-interval 5 - 31no sntp

AT8901/2/3 List of CommandsPage B - 13 AT8901/2/3 CLI Reference Manualno transport output telnet 6 - 8no trapflags 3 - 37no users name 6 - 13no use

List of Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page B - 14radius server key 6 - 26radius server msgauth 6 - 26radius server primary 6 -

AT8901/2/3 List of CommandsPage B - 15 AT8901/2/3 CLI Reference Manualset igmp mrouter interface 2 - 63set prompt 6 - 35set watchdog 6 - 36show acc

AT8901/2/3 PrefacePage iii AT8901/2/3 CLI Reference ManualP R E L I M I N A R YAbout This BookThis document describes configuration commands for FASTP

Using the Command-Line Interface AT8901/2/3AT8901/2/3 CLI Reference Manual Page 1 - 6Table 6 explains how to enter or exit each mode.Line ConfigSwitch

List of Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page B - 16show igmpsnooping mrouter interface 2 - 64show igmpsnooping mrouter vlan 2 - 6

AT8901/2/3 List of CommandsPage B - 17 AT8901/2/3 CLI Reference Manualshow lldp interface 2 - 70show lldp local-device 2 - 72show lldp local-device

List of Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page B - 18show spanning-tree brief 2 - 13show spanning-tree interface 2 - 14show spannin

AT8901/2/3 List of CommandsPage B - 19 AT8901/2/3 CLI Reference Manualsnmptrap snmpversion 6 - 21sntp broadcast client poll-interval 5 - 29sntp clie

List of Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page B - 20switchport protected (Interface Config) 2 - 31tacacs-server host 6 - 30tacacs-

AT8901/2/3 Using the Command-Line InterfacePage 1 - 7 AT8901/2/3 CLI Reference ManualGlobal Config From the Privileged EXEC mode, enter configure.To e

Using the Command-Line Interface AT8901/2/3AT8901/2/3 CLI Reference Manual Page 1 - 81.5.1 Command Completion and AbbreviationCommand completion finis

AT8901/2/3 Using the Command-Line InterfacePage 1 - 9 AT8901/2/3 CLI Reference Manual1.6 Using CLI HelpEnter a question mark (?) at the command prompt

Using the Command-Line Interface AT8901/2/3AT8901/2/3 CLI Reference Manual Page 1 - 101.7 Accessing the CLIYou can access the CLI by using a direct co

Switching CommandsChapter 12Page 2 - 1 AT8901/2/3 CLI Reference ManualAT8901/2/3

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 22. Switching CommandsThis chapter describes the switching commands available in

AT8901/2/3 Switching CommandsPage 2 - 3 AT8901/2/3 CLI Reference ManualMode Interface Config2.1.2.1 no auto-negotiateThis command disables automati

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 4Format no mtuMode Interface Config2.1.6 shutdownThis command disables a po

AT8901/2/3 Switching CommandsPage 2 - 5 AT8901/2/3 CLI Reference Manual2.1.9 speed allThis command sets the speed and duplex setting for all interface

Preface AT8901/2/3AT8901/2/3 CLI Reference Manual Page ivP R E L I M I N A R Ynames, company logos and trademarks, which are registered trademarks and

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 6Mode Privileged EXECGroup Name Displays the group name of an entry in the

AT8901/2/3 Switching CommandsPage 2 - 7 AT8901/2/3 CLI Reference Manual2.2.3 spanning-tree configuration nameThis command sets the Configuration Ident

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 82.2.6 spanning-tree forceversionThis command sets the Force Protocol Version pa

AT8901/2/3 Switching CommandsPage 2 - 9 AT8901/2/3 CLI Reference ManualFormat no spanning-tree hello-timeMode Interface Config2.2.9 spanning-tree

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 10If you specify the external-cost option, this command sets the external-path c

AT8901/2/3 Switching CommandsPage 2 - 11 AT8901/2/3 CLI Reference ManualMode Global Config2.2.12.1 no spanning-tree mst instanceThis command removes

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 122.2.14.1 no spanning-tree mst vlanThis command removes an association between

AT8901/2/3 Switching CommandsPage 2 - 13 AT8901/2/3 CLI Reference ManualBridge Identifier The bridge identifier for the CST. It is made up using the

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 142.2.19 show spanning-tree interfaceThis command displays the settings and para

AT8901/2/3 Switching CommandsPage 2 - 15 AT8901/2/3 CLI Reference ManualAuto-Calculate Port Path Cost This indicates whether auto calculation for por

AT8901/2/3 PrefacePage v AT8901/2/3 CLI Reference ManualP R E L I M I N A R YYour new Kontron product was developed and tested carefully to provide al

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 162.2.21 show spanning-tree mst port summaryThis command displays the settings o

AT8901/2/3 Switching CommandsPage 2 - 17 AT8901/2/3 CLI Reference ManualConfiguration Name Identifier used to identify the configuration currently be

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 182.3.3 vlan This command creates a new VLAN and assigns it an ID. The ID is a v

AT8901/2/3 Switching CommandsPage 2 - 19 AT8901/2/3 CLI Reference Manual2.3.5.1 no vlan ingressfilterThis command disables ingress filtering. If ingre

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 20auto The interface is dynamically registered in this VLAN by GVRP. The inter

AT8901/2/3 Switching CommandsPage 2 - 21 AT8901/2/3 CLI Reference Manualreceiving interface are admitted and forwarded to ports that are members of th

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 222.3.14 vlan protocol groupThis command adds protocol-based VLAN groups to the

AT8901/2/3 Switching CommandsPage 2 - 23 AT8901/2/3 CLI Reference Manual2.3.17.1 no protocol groupThis command removes the <vlanid> from this pr

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 242.3.20 vlan pvidThis command changes the VLAN ID per interface.Default 1Form

AT8901/2/3 Switching CommandsPage 2 - 25 AT8901/2/3 CLI Reference ManualMode VLAN database2.3.23.1 no vlan association macThis command removes the a

Preface AT8901/2/3AT8901/2/3 CLI Reference Manual Page viP R E L I M I N A R YIn order to maintain Kontron’s product warranty, this product must not b

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 26unless a join request is received on this port. This is equivalent to reg-istr

AT8901/2/3 Switching CommandsPage 2 - 27 AT8901/2/3 CLI Reference Manualin the tag. In an untagged frame, the VLAN is the Port VLAN ID spec-ified for

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 28Default vmanFormat dvlan-tunnel ethertype {802.1Q | vman | custom} [0-6553

AT8901/2/3 Switching CommandsPage 2 - 29 AT8901/2/3 CLI Reference ManualFormat show dot1q-tunnel [interface {<unit/slot/port> | all}]Modes P

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 30Mode Global Config2.5.2 vlan priorityThis command configures the default 802

AT8901/2/3 Switching CommandsPage 2 - 31 AT8901/2/3 CLI Reference Manual2.6.2 switchport protected (Interface Config)Use this command to add an interf

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 32Protected Indicates whether the interface is protected or not. It shows TRUE

AT8901/2/3 Switching CommandsPage 2 - 33 AT8901/2/3 CLI Reference Manual2.7.2.1 no set garp timer leaveThis command sets the GVRP leave time on all po

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 34NOTE: If GVRP is disabled, the system does not forward GVRP messages.2.8.1 set

AT8901/2/3 Switching CommandsPage 2 - 35 AT8901/2/3 CLI Reference Manual20 centiseconds (0.2 seconds). The finest granularity of specification is one

AT8901/2/3 PrefacePage vii AT8901/2/3 CLI Reference ManualP R E L I M I N A R Ygiven time, are excluded. The extent of Kontron Modular Computers GmbH

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 362.9.2 set gmrp interfacemodeThis command enables GARP Multicast Registration P

AT8901/2/3 Switching CommandsPage 2 - 37 AT8901/2/3 CLI Reference Manual600 centiseconds (0.2 to 6.0 seconds). The factory default is 60 centi-seconds

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 38of authentication login methods is three. The possible method values are local

AT8901/2/3 Switching CommandsPage 2 - 39 AT8901/2/3 CLI Reference Manualassigned to a specific user if the user is configured locally. If this value i

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 40Default autoFormat dot1x port-control {force-unauthorized | force-autho-riz

AT8901/2/3 Switching CommandsPage 2 - 41 AT8901/2/3 CLI Reference Manual2.10.11.1 no dot1x re-authenticationThis command disables re-authentication of

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 42Format dot1x timeout {{reauth-period <seconds>} | {quiet-period <se

AT8901/2/3 Switching CommandsPage 2 - 43 AT8901/2/3 CLI Reference ManualFormat users login <user> <listname>Mode Global Config2.10.17

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 44Port The interface whose configuration is displayed.Control Mode The config

AT8901/2/3 Switching CommandsPage 2 - 45 AT8901/2/3 CLI Reference ManualThe value is expressed in seconds and will be in the range of 1 and 65535.Reau

Preface AT8901/2/3AT8901/2/3 CLI Reference Manual Page viiiP R E L I M I N A R Y

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 46Format show dot1x users <unit/slot/port>Mode Privileged EXECUser U

AT8901/2/3 Switching CommandsPage 2 - 47 AT8901/2/3 CLI Reference Manualingressing on an interface increases beyond the configured threshold, the traf

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 48Format no storm-control broadcast all level Mode Global Config2.11.5 storm

AT8901/2/3 Switching CommandsPage 2 - 49 AT8901/2/3 CLI Reference ManualFormat storm-control multicast allMode Global Config2.11.7.1 no storm-cont

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 502.11.10 storm-control unicast levelThis command configures the unicast storm r

AT8901/2/3 Switching CommandsPage 2 - 51 AT8901/2/3 CLI Reference ManualMode Global Config2.11.12.1 no storm-control unicast all levelThis command r

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 52Ucast Level Shows the Unknown Unicast or DLF (Destination Lookup Failure) st

AT8901/2/3 Switching CommandsPage 2 - 53 AT8901/2/3 CLI Reference ManualMode Interface Config2.12.3 deleteport (Interface Config)This command delete

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 54Format no port lacpmode Mode Interface Config2.12.7 port lacpmode all Th

AT8901/2/3 Switching CommandsPage 2 - 55 AT8901/2/3 CLI Reference Manual2.12.10 port-channel nameThis command defines a name for the port-channel (LAG

AT8901/2/3Page 0 - 1 AT8901/2/3 CLI Reference ManualChapter11. Using the Command-Line Interface ...

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 56Mbr Ports A listing of the ports that are members of this port-channel (LAG)

AT8901/2/3 Switching CommandsPage 2 - 57 AT8901/2/3 CLI Reference ManualMode Global Config 2.13.2 no monitor This command removes all the source por

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 5801:80:C2:00:00:21, and FF:FF:FF:FF:FF:FF. The <vlanid> parameter must id

AT8901/2/3 Switching CommandsPage 2 - 59 AT8901/2/3 CLI Reference ManualFormat no macfilter addsrc all <macaddr> <vlanid>Mode Global C

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 60If an interface has IGMP Snooping enabled and you enable this interface for ro

AT8901/2/3 Switching CommandsPage 2 - 61 AT8901/2/3 CLI Reference Manualremove the layer 2 LAN interface from its forwarding table entry upon receivin

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 62report for a particular group in that interface. This value must be less than

AT8901/2/3 Switching CommandsPage 2 - 63 AT8901/2/3 CLI Reference ManualFormat no set igmp mrouter <vlanid>Mode Interface Config2.15.8 set i

Switching Commands AT8901/2/3AT8901/2/3 CLI Reference Manual Page 2 - 64Max Response Time Displays the amount of time the switch waits after it sends

AT8901/2/3 Switching CommandsPage 2 - 65 AT8901/2/3 CLI Reference ManualDescription The text description of this multicast table entry. Interfaces