Kontron JRexplus-LX Manual do Utilizador descarregar pdf (Página 33)

KTD-S0001-C Page 29 LAN Controller

JRexplus LX User's Guide

15 LAN Controller

The JRexplus LX uses a Realtek RTL8110SC Gigabit PCI LAN controller. The controller support 10/ 100/1000

Base-T interfaces. The devices auto-negotiates the use of a 10, 100 or 1000 Mbps connection.

Additionally it is possible to enable the LAN PXE Boot in the BIOS Setup to allow the system to boot up via a

network connection from a PXE server.

15.1 Connector

The LAN interface is available through the standard RJ45 connector X11 (8 pins).

Header Pin Signal Name Function

1 TXD+ / BI_D1+ 10/100 transmit / 1000 pair 1 (positive)

2 TXD- / BI_D1- 10/100 transmit / 1000 pair 1 (negative)

3 RXD+ / BI_D2+ 10/100 receive / 1000 pair 2 (positive)

4 BI_D3+ 1000 pair 3 (positive)

5 BI_D3- 1000 pair 3 (negative)

6 RXD- / BI_D2- 10/100 receive / 1000 pair 2 (negative)

7 BI_D4+ 1000 pair 4 (positive)

8 BI_D4- 1000 pair 4 (negative)

15.2 Connector LED Definition

The network transmission rate and activity are indicated by two LEDs. LED10 (10 Mbit; single color LED) and

LED100/LED1000 (100 Mbit respectivly 1 Gbit; two color LED).

LED10 (yellow)

LED1000

(

orange

)

LED100 (green)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

Sem comentários

Kontron JRexplus-LX Manual do Utilizador Página 33