Kontron JRexplus-LX Manual do Utilizador descarregar pdf (Página 17)

KTD-S0001-C Page 13 Graphics Interface

JRexplus LX User's Guide

7.2 Flat Panel Connectors

The LVDS interface for the flat panel is available through the X18 connector (30 pins) on the bottom side of

the board. The implementation of this subsystem complies with the JILI specification of KONTRON Tech-

nology A/S. Another option for connecting a display to the JRexplus LX is a (LV)TTL compatible 18 bit RGB

interface available on X17 (32 pins). A variety of cables for different display types are available from

KONTRON. Please refer to the actual Display Cable Guide on the same product web site.

7.2.1 JILI30 Connector

Header Pin Signal Name Function

1 FTX0- First channel data output 0 (negative)

2 FTX0+ First channel data output 0 (positive)

3 FTX1- First channel data output 1 (negative)

4 FTX1+ First channel data output 1 (positive)

5 FTX2- First channel data output 2 (negative)

6 FTX2+ First channel data output 2 (positive)

7 GND Ground

8 FTXC- First channel clock output (negative)

9 FTXC+ First channel clock output (positive)

10 FTX3- First channel data output 3 (negative)

11 FTX3+ First channel data output 3 (positive)

12 N.C. Not connected

13 N.C. Not connected

14 GND Ground

15 N.C. Not connected

16 N.C. Not connected

17 GND Ground

18 N.C. Not connected

19 N.C. Not connected

20 N.C. Not connected

21 N.C. Not connected

22 N.C. Not connected

23 N.C. Not connected

24 GND Ground

25 SDA I2C data line

26 DATAENA Data enable output

27 SCL I2C clock line

28 - 30

VCC

Power +3.3V or +5V

Attention: The JILI30 interface supports only the VESA FPDI standard.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Sem comentários

Kontron JRexplus-LX Manual do Utilizador Página 17