Kontron AT890X Full-Size CLI Manual do Utilizador descarregar pdf (Página 235)

AT8901/2/3 Utility Commands

Page 5 - 37 AT8901/2/3 CLI Reference Manual

• p-node—Peer-to-peer

• m-node—Mixed

• h-node—Hybrid (recommended)

Default none

Format

netbios-node-type <type>

Mode DHCP Pool Config

5.9.13.1 no netbios-node-type

This command removes the NetBIOS node Type.

Format

no netbios-node-type

Mode DHCP Pool Config

5.9.14 next-server

This command configures the next server in the boot process of a DHCP client.The

<address> parameter is the IP address of the next server in the boot process, which is

typically a TFTP server.

Default inbound interface helper addresses

Format

next-server <address>

Mode DHCP Pool Config

5.9.14.1 no next-server

This command removes the boot server list.

Format

no next-server

Mode DHCP Pool Config

5.9.15 option

The option command configures DHCP Server options. The <code> parameter

specifies the DHCP option code and ranges from 1-254. The

parameter specifies an NVT ASCII character string. ASCII character strings that

contain white space must be delimited by quotation marks. The

hex <string>

parameter specifies hexadecimal data. In hexadecimal, character strings are two

hexadecimal digits. You can separate each byte by a period (for example, a3.4f.22.0c),

colon (for example, a3:4f:22:0c), or white space (for example, a3 4f 22 0c).

Default none

Format

option <code> {ascii string | hex <string1>

[<string2>...<string8>] | ip <address1>

[<address2>...<address8>]}

Mode DHCP Pool Config

5.9.15.1 no option

This command removes the DHCP Server options. The <code> parameter specifies the

DHCP option code.

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 303 304

Comentários a estes Manuais

Sem comentários

Kontron AT890X Full-Size CLI Manual do Utilizador Página 235

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Kontron AT890X Full-Size CLI