Kontron AT8901M CLI Manual do Utilizador descarregar pdf (Página 268)

Management Commands AT8901M

AT8901M CLI Reference Manual Page 6 - 16

NOTE: Community names in the SNMP Community Table must be unique.

When making multiple entries using the same community name, the

first entry is kept and processed and all duplicate entries are ignored.

Default public and private, which you can rename

default values for the remaining four community names are blank

Format snmp-server community <name>

Mode Global Config

6.6.2.1 no snmp-server community

This command removes this community name from the table. The <name> is the

community name to be deleted.

Format no snmp-server community <name>

Mode Global Config

6.6.3 snmp-server community ipaddr

This command sets a client IP address for an SNMP community. The address is the

associated community SNMP packet sending address and is used along with the client

IP mask value to denote a range of IP addresses from which SNMP clients may use that

community to access the device. A value of 0.0.0.0 allows access from any IP address.

Otherwise, this value is ANDed with the mask to determine the range of allowed client

IP addresses. The name is the applicable community name.

Default 0.0.0.0

Format snmp-server community ipaddr <ipaddr> <name>

Mode Global Config

6.6.3.1 no snmp-server community ipaddr

This command sets a client IP address for an SNMP community to 0.0.0.0. The name is

the applicable community name.

Format no snmp-server community ipaddr <name>

Mode Global Config

6.6.4 snmp-server community ipmask

This command sets a client IP mask for an SNMP community. The address is the

associated community SNMP packet sending address and is used along with the client

IP address value to denote a range of IP addresses from which SNMP clients may use

that community to access the device. A value of 255.255.255.255 will allow access

from only one station, and will use that machine's IP address for the client IP address.

A value of 0.0.0.0 will allow access from any IP address. The name is the applicable

community name.

Default 0.0.0.0

Format snmp-server community ipmask <ipmask> <name>

Mode Global Config

1 2 ... 263 264 265 266 267 268 269 270 271 272 273 ... 312 313

Sem comentários

Kontron AT8901M CLI Manual do Utilizador Página 268