Kontron COMe-cP2020 Manual do Utilizador descarregar pdf (Página 87)

www.kontron.com

COMe-P2020 User Guide

2. Select new base configuration

=> sconf select 7

Default configuration active

=========+-===============+-===============+-===============+-

===============

Base | Serdes #0 | Serdes #1 | Serdes #2 | Serdes #3

Config | | | |

=========+-===============+-===============+-===============+-

===============

< 0> | OFF OFF OFF OFF

**< 1>**| PCIEx4 @2.5 RC

< 2> | PCIEx1 @2.5 RC PCIEx1 @2.5 RC PCIEx2 @2.5 RC

< 3> | PCIEx2 @2.5 RC PCIEx2 @2.5 RC

< 4> | PCIEx1 @2.5 RC PCIEx1 @2.5 RC SGMII SGMII

< 5> | PCIEx2 @2.5 RC SGMII SGMII

< 6> | PCIEx1 @2.5 RC SRIOx1 @2.5 H SGMII SGMII

--[ 7]--| SRIOx1 @2.5 H SRIOx1 @2.5 H SGMII SGMII

< 8> | SRIOx4 @3.125H

eTSEC2 configured in SGMII mode

eTSEC3 configured in SGMII mode

SRIO host mode, device ID is 0

Boot ROM location is spi

3. confine new base configuration

=> sconf set etsec2 rgmii

Default configuration active

=> sconf set etsec3 rgmii

Default configuration active

4. check changes

=> sconf info

Default configuration active

...

eTSEC2 configured in RGMII mode

eTSEC3 configured in RGMII mode

SRIO host mode, device ID is 0

Boot ROM location is spi

5. Save new configuration. Board is power-cycled automatically

=> sconf save

Table 6-6: sconf Command (Continued)

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 105 106

Sem comentários

Kontron COMe-cP2020 Manual do Utilizador Página 87