Kontron VMP1 with Netbootloader Manual do Utilizador descarregar pdf (Página 91)

VMP1 NetBootLoader

PCI

FUNCTION: Display PCI information

SYNTAX:

pci

DESCRIPTION: The command “pci” is used to display detailed information on all

detected PCI devices. The bus number, device number, function

number, vendor, and device ID’s are displayed together with the

configured base addresses and the assigned IRQ number.

FUNCTION: Set or display the serial port parameters (format)

SYNTAX:

pf [<port> [<baud>][/[<bitschar>]

…[/[<parity>][/<stops>]]]]

where:

pf command

<port> parameter: string: “term” or “ser0”

defines serial port to be configured

<baud> parameter: value: numeric: “50, 75, 110, 134.5,

150, 300, 600, 1200, 1800, 2000, 2400, 3600,

4800, 7200, 9600, 19200, 38400, 115200”

defines the baud rate for the port

<bitschar> parameter: value: numeric: “7” or “8”

defines the number of bits per character

<parity> parameter: string: “n” (none), “o” (odd), “e” (even)

defines parity to be used

<stops> parameter: value: number: “1”, “2”

defines number of stop bits

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 119 120

Sem comentários

Kontron VMP1 with Netbootloader Manual do Utilizador Página 91