Kontron COMe-cCT6 Manual do Utilizador descarregar pdf (Página 17)

COMe-cCT6 / Product Specification

3.5 Electrical Specification

3.5.1 Supply Voltage

Following supply voltage is specified at the COM Express® connector:

VCC:

4.75 - 20V

Standby:

5V DC +/- 5%

RTC:

2.5V - 3.47V

- 5V Standby voltage is not mandatory for operation.

- Extended Temperature (E1) variants are validated for 12V supply only

3.5.2 Power Supply Rise Time

» The input voltages shall rise from ≤10% of nominal to within the regulation ranges within 0.1ms to 20ms.

» There must be a smooth and continuous ramp of each DC input voltage from 10% to 90% of its final set-point

following the ATX specification

3.5.3 Supply Voltage Ripple

» Maximum 100 mV peak to peak 0 – 20 MHz

3.5.4 Power Consumption

The maximum Power Consumption of the different COMe-cCT6 variants is 7.5 - 13W (100% CPU load on all cores; 90°C CPU

temperature). Further information with detailed measurements are available in Application Note KEMAP054 available on

EMD Customer Section. Information there is available after registration.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 109 110

Sem comentários

Kontron COMe-cCT6 Manual do Utilizador Página 17