Kontron CP305 BIOS Manual do Utilizador descarregar pdf (Página 68)

Boot Setup CP305 BIOS

Page 58 ID 1035-8356, Rev. 1.0

P R E L I M I N A R Y

Wait for ‘F1’ If Error

SDO

This function is used to allow the Wait for ‘F1’ Error setting to be modified.

Optimal and Fail-Safe default settings: Disabled

Hit ‘DEL’ Message Display

This function is used to allow the Hit ‘DEL’ to enter Setup Message Display to be modified.

Optimal and Fail-Safe default settings: Enabled

Interrupt 19 Capture

This function is used to allow option ROMs such as network controllers to trap BIOS interrupt 19.

Optimal and Fail-Safe default settings: Disabled

Retry Boot Sequence

SDO

This function is used to specify how the system is to respond to a boot error.

Optimal and Fail-Safe default settings: Enabled

SETTING DESCRIPTION

Disabled Use this setting to prevent the CP305 from waiting on an error for user intervention. If this

setting is used, the system will continue to boot up the operating system. If ‘F1’ is enabled,

the system will wait until the BIOS setup is entered.

This setting should be used if there is a known reason for a BIOS error to occur. An exam-

ple would be a system administrator must remote boot the system. The computer system

does not have a keyboard currently attached.

Enabled Use this setting to allow the BIOS to wait for any error. If an error is detected, pressing

<F1> will enter Setup and the BIOS setting can be adjusted to fix the problem. This nor-

mally happens when upgrading the hardware and not setting the BIOS to recognize it.

SETTING DESCRIPTION

Disabled Use this setting to prevent the display of the message

Hit Del to enter Setup

during memory initialization.

If Quiet Boot is enabled, the Hit ‘DEL’ message will not be displayed.

Enabled Use this setting to allow the display of the message

Hit Del to enter Setup

during memory initialization.

SETTING DESCRIPTION

Disabled Use this setting to prevent option ROMs from trapping interrupt 19.

Enabled Use this setting to allow option ROMs to trap interrupt 19.

SETTING DESCRIPTION

Disabled Use this setting to finish booting and show error message in case of boot failure.

Enabled Use this setting to specify that booting should be attempted again until a boot device is

found. To interrupt retrying, the system must be reset.

Use this setting when booting from a network drive.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 123 124

Comentários a estes Manuais

Sem comentários

Kontron CP305 BIOS Manual do Utilizador Página 68

Comentários a estes Manuais

Manuais e produtos relacionados com Software Kontron CP305 BIOS