Kontron SMARC-sXBTi Manual do Utilizador Página 22

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 36
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 21
SMARC-sXBTi / Features and Interfaces
4 Features and Interfaces
4.1 Onboard eMMC Flash
The SMARC-sXBTi features a 14x18mm onboard Micron NAND Flash drive with capacities of 2-64GB eMMC. The Flash drive
includes a Phison PS8200 micro controller and supports:
» JEDEC/MMC standard version 4.41 compliant
» class 0 (basic); class 2 (block, read); class 4 (block write); class 5 (erase); class 6 (write protect); class 7 (lock card)
» MMCplus™ and MMCmobile™ protocols
» 52 MHz clock speed (MAX)
» Boot operation (high-speed boot)
» Sleep mode
» Replay-protected memory block (RPMB)
» Secure erase and trim
» Permanent and power-on write protection
» Double data rate (DDR) function
» Wear Leveling, ECC and block management
» -40°C to +85°C indutrial temperature range
» Multi-Level-Cell (MLC) technology
» Single-Level-Cell (SLC) technology optional by firmware re-configuration during SMARC-sXBTi manufacturing
Flash Part No. MTFC4GMVEA-4M IT MTFC8GLVEA-4M IT MTFC16GJVEC-4M IT MTFC32GJVED-4M IT MTFC64GJVDN-4M IT
Nominal Flash Size MLC 4GByte 8GByte 16GByte 32GByte 64GByte
Nominal Flash Size SLC 2GByte 4GByte 8GByte 16GByte 32GByte
Sequential MLC read
speed
44 MB/s 44 MB/s 44 MB/s 44 MB/s 44 MB/s
Sequential MLC write
speed
13.5 MB/s 13.5 MB/s 20 MB/s 20MB/s 20 MB/s
I/O Performance
read/write
1100 / 100 IOPS 1100 / 100 IOPS 1100 / 100 IOPS 1100 / 100 IOPS 1100 / 100 IOPS
Endurance (# of P/E
cycles)
MLC: 3k
SLC: 60k
MLC: 3k
SLC: 60k
MLC: 3k
SLC: 60k
MLC: 3k
SLC: 60k
MLC: 3k
SLC: 60k
Notes:
» Random access of 4KB chunk, sequential read access of 1MB chunk
» Data based on Datasheet Micron eMMC Rev.B from 2/2012
» ~10% of the nominal flash size are reserved for Firmware and Block Management
4.2 Secure Digital Card
The SMARC-sXBTi supports an SDIO Interface to be used for micro/mini/standard SD Card sockets. Following SD Cards are
validated from Kontron and recommended for use:
swissbit® S-200U & S-300U Series Industrial microSD Card
» compliant to SD Card specification 2.0
» Wear Leveling of static and dynamic data
22
Vista de página 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Comentários a estes Manuais

Sem comentários