Kontron JRexplus-LX Display Cable Manual do Utilizador descarregar pdf (Página 12)

KTD-S0018-0 Page 10 KAB-ADAPT-LVDStoTTL

Display Cable Guide

5 KAB-ADAPT-LVDStoTTL

The adapter has two connectors – one counter part of the JILI30 SBC connector and one for the KAB-

FLEX32 cable.

5.1 JILI30 Connector

The JILI30 interface of the KAB-ADAPT-LVDStoTTL uses only 3 LVDS data pairs so that only 18 bit displays

can be driven. The following table shows the pinout.

Header Pin Signal Name Function

1 FTX0- First channel data 0 input (negative)

2 FTX0+ First channel data 0 input (positive)

3 FTX1- First channel data 1 input (negative)

4 FTX1+ First channel data 1 input (positive)

5 FTX2- First channel data 2 input (negative)

6 FTX2+ First channel data 2 input (positive)

7 GND Ground

8 FTXC- First channel clock input (negative)

9 FTXC+ First channel clock input (positive)

10 - 13 N. C. Not connected

14 GND Ground

15 - 16 N. C. Not connected

17 GND Ground

18 - 23 N. C. Not connected

24 GND Ground

25 N. C. Not connected

26 DATAENA

Designator badly chosen - means:

Panel power enable (power sequencing)

27 N. C. Not connected

28 - 30

VCC

Power +5.0V

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Sem comentários

Kontron JRexplus-LX Display Cable Manual do Utilizador Página 12