Kontron CPCI Generic backplane Manual do Utilizador descarregar pdf (Página 21)

CPCI Backplane General

The pinouts of the DIN M24/8 and of the ATX power supply connectors are illustrated below.

Figure 5:DIN M24/8 Power Supply

Connector

Table 3: Power Supply Connectors

Connector Type Description

DIN M-Series

3 or 4-pole DIN M-series female power supply connectors for power

throughput to the power supply unit and a 30- (32-) pole DIN M24/8 female

power supply connector for power reception from the power supply unit

(DIN 41612)

Faston/M4

M4 screw connection combined with 6.3mm*0.8mm strip connectors.

ATX

Male 20-pole ATX connector for power supply from the reverse side of the

backplane; the ATX PSUs available on the market are provided with a

matching connector.

Note...

As the overall pinout of the DIN M24/8 connector installed on a 3U

backplane is identical to that of both DIN M24/8 connectors installed

on a 6U backplane taken together, on a 6U backplane some functions

are connected on the upper or on the lower connector only and, there-

fore, are not connected on the other connector (see tables below).

Warning!

Please note that the

pinouts of the DIN

M24/8 power supply

connectors of various

power supply units dif-

fer. Therefore, please

refer also to the pinout

tables of the single

power supply units for

any possible differ-

ences to the pinouts

supplied in the tables

below.

...

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Sem comentários

Kontron CPCI Generic backplane Manual do Utilizador Página 21