Kontron COMe Ref.Carrier-i T10 Manual do Utilizador descarregar pdf (Página 10)

COMe Reference Carrier-i Type 10 / Specification

3.4 Electrical Specification

Supply Voltage

» Single Power Supply (5.5V – 20V DC)

When external devices are supplied by the COMe Reference Carrier-I Type 10 (via HDD power and LVDS connector) and

the temperature is below 0°C the carrier board supply voltage shall be > 6.5V.

Power Supply Rise time

» The input voltages shall rise from ≤10% of nominal to within the regulation ranges within 0.1ms to 20ms.

» There must be a smooth and continuous ramp of each DC input voltage from 10% to 90% of its final set-point

following the ATX specification

Supply Voltage Ripple

» Maximum 100 mV peak to peak 0-20MHz

Power Connector

» Pin / Ring Type with 2,1mm pin diameter

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Sem comentários

Kontron COMe Ref.Carrier-i T10 Manual do Utilizador Página 10