Kontron AT8402 CLI Manual do Utilizador Página 188

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 253
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 187
Utility Commands AT8402
AT8402 CLI Reference Manual Page 4 - 48
Mode Privileged EXEC
4.10.10 debug rip packet
This command turns on tracing of RIP requests and responses. This command takes no
options. The output is directed to the log file.
Default disabled
Format
debug rip packet
Mode Privileged EXEC
A sample output of the trace message is shown below.
<15> JAN 01 00:35:15 192.168.17.29-1 RIP[181783160]:
rip_map_debug.c(96) 775 %
Pkt RX on Intf: 1/0/1(1), Src_IP:43.1.1.1 Dest_IP:43.1.1.2
Rip_Version: RIPv2 Packet_Type:RIP_RESPONSE
ROUTE 1): Network: 10.1.1.0 Mask: 255.255.255.0 Metric: 1
ROUTE 2): Network: 40.1.0.0 Mask: 255.255.0.0 Metric: 1
ROUTE 3): Network: 10.50.50.0 Mask: 255.255.255.0 Metric: 1
ROUTE 4): Network: 41.1.0.0 Mask: 255.255.0.0 Metric: 1
ROUTE 5): Network:42.0.0.0 Mask:255.0.0.0 Metric:1
Another 6 routes present in packet not displayed.
The following parameters are displayed in the trace message:
TX/RX TX refers to a packet transmitted by the device. RX refers to packets
received by the device.
Intf The interface that the packet came in or went out on. Format used is
slot/port (internal interface number).
Src_IP The source IP address in the IP header of the packet.
Dest_IP The destination IP address in the IP header of the packet.
Rip_Version RIP version used <RIPv1 or RIPv2>.
Packet_Type Type of RIP packet. <RIP_REQUEST or RIP_RESPONSE>.
Routes Up to 5 routes in the packet are displayed in the following format:
Network: <a.b.c.d> Mask <a.b.c.d> Next_Hop <a.b.c.d> Metric <a>
The next hop is only displayed if it is different from 0.0.0.0.
For RIPv1 packets, Mask is always 0.0.0.0.
Number of routes not printed Only the first five routes present in the packet are
included in the trace. There is another notification of the number of
additional routes present in the packet that were not included in the
trace.
4.10.10.1 no debug rip packet
This command disables tracing of RIP requests and responses.
Format
no debug rip packet
Mode Privileged EXEC
Vista de página 187
1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 252 253

Comentários a estes Manuais

Sem comentários