Kontron AM4311 Manual do Utilizador descarregar pdf (Página 21)

Introduction

Page 6 AM4311 User Guide

1.3.8 Vibration

The board is designed to meet the following requirements according to IEC 60068-2-6, Bellcore GR-63, Sec-

tion 4.4 and MIL-STD-810E, Method 514:

• Operating

• 5Hz to 100Hz: 1G @ 0.25 Octave/minute

• 100HZ to 500Hz: 1G @ 1 Octave/minute

• 5Hz @ 0.01 g2 /Hz to 20 Hz @ 0.02 g2 /Hz (slope up)

• 20Hz to 500 Hz @ 0.02 g2 /Hz (flat)

• 3.13 g RMS, 10 minutes per axis for all 3 axes

• Non-Operating

• 5Hz to 50Hz: 0.5G @ 0.1 Octave/minute

• 50Hz to 500Hz: 3G @ 0.25 Octave/minute

1.3.9 Schock

The board is designed to meet the following requirements IEC 60068-2-27 and MIL-STD-810E, Method 516:

• Operating: 30G/11 ms half sine

• Non-Operating: 50G, 170 inches/second trapezoidal

1.3.10 Safety

CB report to IEC 60950-1, complies with EN/CSA/UL 60950-1.

1.3.11 Electromagnetic Compatibility

The board is designed to meet or exceed the following specifications/requirements (assuming an adequate

carrier/chassis):

• CFR 47, FCC Part 15, Subpart B

• Telcordia GR-1089-Core-Issue 3 and SR-3580 Issue 2

• EMC Directive 89/336/EEC (Europe)

• EN55022 (Europe)

• EN55024 (Europe)

• EN61000-4-2 + A1 + A2

• EN61000-4-3 + A1

• EN300 386 V1.3.3, Electro Magnetic Compatibility (EMC) Requirements for Public Telecommunication

Network Equipment; Electromagnetic Compatibility (EMC) Requirements.

1.3.12 MTBF

MTBF is >170,000h@40°C, calculations based on Bellcore/Telcordia SR-332.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Sem comentários

Kontron AM4311 Manual do Utilizador Página 21