Introduction AM4022
Page 1 - 4 ID 1052-0183, Rev. 1.0
The board is offered with various Board Support Packages including Windows and Linux
operating systems. For further information concerning the operating systems available for the
AM4022
,
please contact Kontron.
1.2 Board-Specific Information
Due to the outstanding features of the AM4022, such as superior processing power and flexible
interconnect topologies, this AMC board provides a highly scalable solution not only for a wide
range of telecom and data network applications, but also for several highly integrated industrial
environment applications with solid mechanical interfacing.
Some of the AM4022's outstanding features are:
• Support for the following 3rd generation Intel® Core™ quad- and dual-core processors:
• Intel® Core™ i7-3612QE (SV) processor with ECC, 2.1 GHz, 6 MB L3 cache
• Intel® Core™ i7-3555LE (LV) processor with ECC, 2.5 GHz, 4 MB L3 cache
• Intel® QM77 Express Chipset
• Up to 8 GB, dual-channel, DDR3 SDRAM memory with ECC running at 1600 MHz
• Integrated 3D high performance graphics controller
• Display support for resolutions up to 2560 x 1600 pixels @ 60 Hz
• AMC interconnection:
• Dual Gigabit SerDes connection in the Common Options Region
• Dual SATA storage interface in the Common Options Region
• Two x4 or one x8 PCI Express interface in the Fat Pipes Region (up to 8.0 GT/s and
as a root complex controller only)
• One SATA storage interface in the Extended Options Region
• DisplayPort interface (on request) in the Extended Options Region
• One USB 3.0 and three USB 2.0 (all on request) in the Extended Options Region
• Serial port in the Extended Options Region
• PCI Express reference clock (FCLKA) either output to host or non-synchronized ex-
ternal input
• Full hot swap support
• One Quad Gigabit Ethernet Controller, Intel® I350
• Onboard extension connector for either an optional SATA Flash module with up to 64 GB
NAND Flash memory or an optional battery module for RTC backup
• One mini USB 2.0 host port on Front I/O
• Two Gigabit Ethernet ports on Front I/O
• One Serial port (RS-232) or DisplayPort on Front I/O, depending on the front panel version
• TCG 1.2-compliant Trusted Platform Module (TPM) (on request)
• Two SPI Flash chips (2 x 8 MB) for two separate uEFI BIOS images:
• One standard SPI boot flash
• One recovery SPI boot flash
• Dedicated IPMI Module Management Controller with redundant Firmware Flash (2 x 512 kB)
• Watchdog Timer
• Four bicolor User-Specific LEDs (providing debugging and POST code information, etc.)
• Two onboard DIP switches SW2 and SW3 (for selecting the SPI boot flashes, overwriting
E-Keying, etc.)
• Standard temperature range: - 5°C to + 55°C
• Extended temperature range: - 40°C to + 70°C (on request)
• Thermal management and passive heat sink solution for forced airflow cooling
• Single Mid-size and Full-size AMC module with or without retaining screws
(Full-size and front panels with retaining screws on request)
• AMI Aptio®, a uEFI-compliant platform firmware
(92 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais