Kontron CP381 Manual do Utilizador descarregar pdf (Página 25)

CP381 Introduction

1.6 Technical Specifications

Table 1-3: CP381 Main Specifications

GROUP TYPE DESCRIPTION

DI ProComm

Controller and

FPGA Logic Device Provides CompactPCI interfacing and IO control logic

Peripheral

Memory

CapROM 4 kBit (512 byte) EEPROM

External

Interfaces

Digital Input One 62-pin, female, three row, D-sub connector

Supports up to thirty digital input channels

CompactPCI Bus One, 132-pin, female, six row connector (standard CPCI type

connector for J1)

Internal Interfaces

JTAG/ISP JTAG/ISP 10-pin SMD connector for programming and testing

purposes

Indicators Front Panel LED’s Two green LED’s to indicate operational status

General

Mechanical Conforms with IEEE 1101.1

Power Requirements Voltage: 3.3V

Power Consumption 370 mW maximum

Temperature Range Operational: 0ºC to +70ºC Standard

-40ºC to +85ºC E2

Storage: -55ºC to +125ºC

Humidity 0% to 95% non-condensing

Dimensions 100 mm x 160 mm single height Eurocard

Board Weight 145 grams

Software Driver

Information

(See note below)

PCI Header Device ID: 0x5555

Vendor ID: 0x1556

Class Code: 0x110000

Subsystem Device ID: 0x00E0

Subsystem Vendor ID: 0x1518

Note...

The Device ID and Vendor ID refer to the chip manufacturer. In the Class Code

value given, “11” relates to the data acquisition and signal processing control-

lers and “0000” relates to the DPIO modules. Subsystem Device ID and Sub-

system Vendor ID are defined by PEP.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Comentários a estes Manuais

Sem comentários

Kontron CP381 Manual do Utilizador Página 25

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Kontron CP381