Kontron COMe-bP5020 Manual do Utilizador descarregar pdf (Página 52)

www.kontron.com

User Guide

COMe-bP5020

Table 46: sconf Command

sconf

Provides functions for configuration of external interfaces

SYNTAX:

sconf command

info option:

displays available configurations

select option:

selects base configuration <num>

<num> parameter: text string (decimal)

<0, 1, ... n>

number of base configuration

set option:

indicate or configure parameter for new base configuration

<par> parameter: text string

<[x … ]x>

parameter for new base configuration

<val> parameter: text string

<[x … ]x>

value assigned to <par>

status option:

displays information concerning the status of board configuration

save option:

saves the current settings

undo option:

ignore current settings and use saved settings again

DESCRIPTION: This command is used to configure external interfaces available on the COMe-bP5020’s connectors.

The “sconf info” command shows the possible configurations as well as the currently selected configura-

tion.

The active configuration is indicated using the “sconf status” command.

To configure external interfaces, select a base configuration via the “sconf select” command. Then, the

parameters can be defined more exactly via the “sconf set” command.

To apply the configuration, invoke the “sconf save” command then perform a module powercycle (a hard-

ware reset is not sufficient to activate the new configuration).

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 70 71

Sem comentários

Kontron COMe-bP5020 Manual do Utilizador Página 52